News for hackers. Stuff that matters.
Re:Internet down in Tumbler Ridge, B.C., after beaver chews ... by cm2187 on Sunday April 25, 2021 @04:28PM (#26936359)
How can they tell where is the cable damage? If the cable is all underground, surely they didn’t dig up the whole thing? Can they measure that from one end? Do they do a binary search by digging and testing?
Re:Internet down in Tumbler Ridge, B.C., after beaver chews ... by segfaultbuserr on Sunday April 25, 2021 @06:56PM (#26937508)
If you want to understand how TDR works, watch this classic tutorial from the mid-50s in the AT&T archive. The first 5 minutes, showing the reflection of an open and short circuit is enough.

* AT&T Archives: Similiarities of Wave Behavior

https://www.youtube.com/watch?v=DovunOxlY1k

Many are surprised when they learned that it's possible to detect the location of a break in the mains wiring or an Ethernet cable, just by doing an electrical test from one end of the cable (some Ethernet cards even have builtin TDR support!). There's no closed loop, why is it possible to test anything electrically? Because at high frequency, the circuit becomes an electromagnetic waveguide.

Basically like a radar, you send a fast electrical or optical pulse to the electrical cable or the optical fiber, the EM wave travels along the cable until it hits the break and reflects back. You record the time and listen for the echo. All discontinuities (such as damages) on the line will reflect and distort the original pulse. Use the speed of light to pinpoint the location of the fault.

Re:Internet down in Tumbler Ridge, B.C., after beaver chews ... by walrus01 on Sunday April 25, 2021 @04:34PM (#26936420)
OTDR - optical time domain reflectometer, you connect it to the fiber at one end and it'll tell you where the break is, accurate to plus or minus 20-30 meters
Re:Internet down in Tumbler Ridge, B.C., after beaver chews ... by morsch on Sunday April 25, 2021 @04:33PM (#26936406)