Re:Home-Built Scanning Tunneling Microscope (2015)
by amelius on Thursday April 08, 2021 @02:13PM
(#26741942)
Can you image non-conductive surfaces with this technique?
[ Parent
| on HN ]
Re:Home-Built Scanning Tunneling Microscope (2015)
by smitty1110 on Thursday April 08, 2021 @02:16PM
(#26741973)
Nope, the technique for that is an Atomic Force Microscopy[1].
Re:Home-Built Scanning Tunneling Microscope (2015)
by alted on Thursday April 08, 2021 @02:50PM
(#26742324)
And it turns out DIY atomic force microscopes are possible too! (e.g., [1]) It's probably less likely to get all the way to atomic resolution (0.01nm) like a scanning tunneling microscope, but atomic force microscopes can take many types of 1-to-1000nm-scale measurements and are often more practically useful.
[1] https://hackaday.com/2014/04/29/a-diy-atomic-force-microscop...
Re:Home-Built Scanning Tunneling Microscope (2015)
by waiquoo on Thursday April 08, 2021 @03:48PM
(#26742935)
OR helium ion microscopy, but that is not as widely available afaik
1: https://en.wikipedia.org/wiki/Scanning_helium_ion_microscope
Re:Home-Built Scanning Tunneling Microscope (2015)
by ortusdux on Thursday April 08, 2021 @03:19PM
(#26742611)
Best you can do is gold plate the object you would like to scan. Sputter coating is the preferred method.
https://en.wikipedia.org/wiki/Scanning_electron_microscope#S...
Re:Home-Built Scanning Tunneling Microscope (2015)
by Retric on Thursday April 08, 2021 @04:37PM
(#26743470)
That’s a SEM which is significantly lower resolution, but lets you zoom in and out across a huge range.
STM on the other hand is for looking at individual atoms so coating a surface is just going to show that coating. https://en.wikipedia.org/wiki/Scanning_tunneling_microscope
Re:Home-Built Scanning Tunneling Microscope (2015)
by oasisbob on Thursday April 08, 2021 @04:01PM
(#26743077)
That's for SEM. I've never heard of sputter coating used for STM.
Re:Home-Built Scanning Tunneling Microscope (2015)
by ortusdux on Thursday April 08, 2021 @04:50PM
(#26743600)
You are right, I got those two methods mixed up. It looks like gold sputter coating would be a good solution for the home made tungsten STM tips mentioned in the link.
Re:Home-Built Scanning Tunneling Microscope (2015)
by oasisbob on Thursday April 08, 2021 @04:14PM
(#26743196)
Sort of?
STM is frequently used to characterize adsorbed molecular monolayers on a graphite substrate.
You're obviously depending on electron conduction to image the sample, but you can image all sorts of things which wouldn't be considered conductive as a bulk material.