News for hackers. Stuff that matters.
Re:Pockit Modular computing demo [video] by varjag on Friday March 26, 2021 @10:00AM (#26592226)
Slick.

I have a lingering suspicion though that the cross connector pads, despite looking identical, serve their own specialized functions and cannot be freely mixed. I.e. it would be highly challenging to have all the pads accept USB or HDMI.

Re:Pockit Modular computing demo [video] by Solder_Man on Friday March 26, 2021 @10:29AM (#26592577)
Only high-bandwidth signal groups (such as HDMI) have the limitation of being usable at only one (or a few) positions. Technically these too can be given more/complete placement freedom, but at the cost of a higher PCB layer count, or exceptional noise-immune routing skill, which I presently don't have. I plan to hire a layout expert to assist with the DFM eventually.

The current PCB routing is done such that about 90% of blocks can be interfaced at almost/all positions. (I'll make a more formal statement later after verifying this number.)

This was in fact a foundational aspect of the design -- "How can the classic breadboard be made (a lot) more powerful at the cost of as little flexibility as possible?"

Re:Pockit Modular computing demo [video] by varjag on Friday March 26, 2021 @10:54AM (#26592890)
You can't easily splice balanced signal lines, so it's going to end up more complicated than just a routing issue.

But I like the concept. I understand that the pads are indexed with magnet locks? What happens if a user crams a component in incorrect orientation anyway?

Re:Pockit Modular computing demo [video] by Solder_Man on Friday March 26, 2021 @11:02AM (#26592978)
> signal lines

Good point. I stand corrected.

> orientation

Two features ensure (and encourage) the block placement at the correct orientation.

- layout of the 4 magnets' polarities at each position (and complementary layout on each Block).

- plastic protrusions within the casing (with mating features on each Block).

Just an interesting note: The latter also serve to provide a bi-axial constraint on a Block after attachment, to prevent easy detachment. Together with the (neodymium) magnets, they create a very strong hold, important for Blocks like the Soil moisture sensor demo'ed in this video: https://www.youtube.com/watch?v=vwnpbNNyzdQ&list=UU49EYw900L...

Re:Pockit Modular computing demo [video] by varjag on Friday March 26, 2021 @11:11AM (#26593075)
Smart. It's a sweet project, good luck with development!
Re:Pockit Modular computing demo [video] by peregrine on Friday March 26, 2021 @10:11AM (#26592351)
He mentioned in the comments that those two have specific positions for routing purposes.