News for hackers. Stuff that matters.
Re:Seasonal energy storage in aluminium for 100% solar heat ... by giantg2 on Tuesday March 16, 2021 @10:09AM (#26476855)
So from a residential perspective, they're just using this to produce hydrogen for a hydrogen fuel cell.

The reactions that require the higher temperatures would need to be industrial (and don't seem to be more beneficial than other methods).

So what are the benefits?

Re:Seasonal energy storage in aluminium for 100% solar heat ... by esperen on Tuesday March 16, 2021 @01:13PM (#26479737)
Initially I responded with poor reading comprehension, so allow me an attempt at elucidation.

Elemental aluminum will react spontaneously, at room temperature, with water; liberating hydrogen gas. The reaction is exothermic generating a lot of heat. Both the hydrogen and heat can be used for energy. Heat for heating the home in winter and the hydrogen gas for fuel cells and accessory power.

The reaction needs nothing more than a reaction vessel to hold moderate pressure. A simple stainless vessel would work. The pressure being whatever you want to store your hydrogen at. More than likely, though, you would just go ahead and convert it to electricity with a fuel cell, in which case you don't need to store it.

Aluminum can be stored in blocks, outside. I envisage some northern resident walking outside on a brisk morning with a hack saw and removing a chunk of aluminum to throw in his 'furnace' (reaction vessel) to warm his house and charge his phone, etc. Afterwards you need to drain off the water and collect the alumina/aluminum hydroxide and toss it in the recycling bin.

Aluminum is basically free to store as energy. It requires no maintenance, no upkeep, doesn't degrade appreciably, easily transported. Hell you could build your house out of it. It's akin to wood.

Use cases: Remote residences in the winter. i.e. solar is garbage and no one is shipping you a nuclear reactor.

Re:Seasonal energy storage in aluminium for 100% solar heat ... by giantg2 on Tuesday March 16, 2021 @02:23PM (#26480781)
So if it's stored outside and someone is cutting it with a hacksaw, how is it not reacting to the atmosphere/moisture? I don't think you can simply use a block of it either. The exterior of the block would turn into the "waste" that would then slow or block the reaction with the remaining "fuel".
Re:Seasonal energy storage in aluminium for 100% solar heat ... by esperen on Tuesday March 16, 2021 @10:41AM (#26477302)
Energy storage in the form of aluminum.
Re:Seasonal energy storage in aluminium for 100% solar heat ... by Robotbeat on Tuesday March 16, 2021 @10:44AM (#26477354)
Kind of irrelevant if we don’t have carbonfree electrodes for smelting aluminum.
Re:Seasonal energy storage in aluminium for 100% solar heat ... by esperen on Tuesday March 16, 2021 @12:23PM (#26478926)
If it brings the net carbon footprint down, it could be relevant. Progress is typically iterative
Re:Seasonal energy storage in aluminium for 100% solar heat ... by Robotbeat on Tuesday March 16, 2021 @01:07PM (#26479648)
But that hasn’t been established here. The aluminum produces hydrogen (at some level of inefficiency) which then produces electricity in a fuel cell (more inefficiency).

Consumable electrodes are actually doing chemical work in the aluminum. It’s not just wear from use. To produce 78 grams of Aluminum directly requires 48 grams of Carbon electrodes (using made by graphitizing some tar or coke) which oxidizes to 176 grams of CO2. Aluminum is 31MJ/kg specific energy. Assuming 70% efficiency conversion from aluminum to hydrogen and 70% from hydrogen to electricity (both fairly optimistic figures), you’re talking about 535 grams of emitted CO2 for each kWh of electricity out. Ignoring the electricity input, inefficiencies and losses in making the aluminum, and assuming perfect conversion of the tar to electrodes. Worse than a good, advanced combined cycle natural gas plant (which can get as good as roughly 350 grams per kWh for record efficiency plants).

I just don’t see how this is gonna be a net win without carbonfree electrodes. It seems just about impossible here. Storing hydrogen directly looks to make way more sense.

Re:Seasonal energy storage in aluminium for 100% solar heat ... by giantg2 on Tuesday March 16, 2021 @11:35AM (#26478195)
"Energy storage in the form of aluminum"

And?

What's the benefit? We could store energy in concrete if using gravity or use water to produce the hydrogen for the fuel cell.

Re:Seasonal energy storage in aluminium for 100% solar heat ... by esperen on Tuesday March 16, 2021 @12:20PM (#26478878)
It's mentioned in the 2nd bullet point of the article link: 23.5MWh/m3

The benefit is you can store energy, in aluminum. It has a high energy density, you can safely store it anywhere, it requires no containment at all, etc.

Your last statement includes the answer to your own question. They are using the hydrogen, from water reacting with aluminum, to power a fuel cell.

Re:Seasonal energy storage in aluminium for 100% solar heat ... by giantg2 on Tuesday March 16, 2021 @12:59PM (#26479506)
It can store a lot of energy, but it's not easy nor convenient to release (very slow release rate).