News for hackers. Stuff that matters.
Re:CA crews handle tricky fire at Tesla factory by olivermarks on Friday March 12, 2021 @08:13PM (#26442989)
Wondering why Tesla doesn't have fire suppression solutions in place ready for this type of danger. Surely major Class D fire suppression would be a prerequisite for this type of process?

https://www.elitefire.co.uk/help-advice/detect-and-extinguis...

Re:CA crews handle tricky fire at Tesla factory by xxpor on Friday March 12, 2021 @08:57PM (#26443199)
It wasn't the metal that caught fire, it was the hydraulic fluid. You still wouldn't want to use water on that though.

Everyone down thread is commenting like the aluminum caught fire. That's not what the article says:

"A piece of machinery containing molten metal caught fire"

It's really hard to get aluminum hot enough to combust if it's in a big blob. Powder on the other hand...

Re:CA crews handle tricky fire at Tesla factory by olivermarks on Friday March 12, 2021 @09:04PM (#26443230)
Hydraulic fluid under pressure is a class B fire than can very quickly escalate. Sand bags aren't going to be doing much in those situations

https://youtu.be/aj8-JlRqoWc

If you have molten metals class D powder suppression is needed. I'm amazed the old NUMI plant doesn't have both ready for action.

Re:CA crews handle tricky fire at Tesla factory by xxpor on Saturday March 13, 2021 @01:08PM (#26448510)
Agreed. Class D extinguishers are expensive, but we're talking ~$500 instead of ~$50 for an ABC (obviously depends on size). Both costs are trivial for any manufacturing company, and frankly I'd be shocked if they both weren't required by code.

The only thing that I can think of is perhaps no one noticed until it was too late? And then the employees didn't want to touch it until the fire department showed up. If there was a hydraulic leak, they used the sand bags to stop the spread of the fluid, and then used foam to actually put out the fire? No clue.

Re:CA crews handle tricky fire at Tesla factory by userbinator on Friday March 12, 2021 @11:23PM (#26443943)
Incidentally, this is why a lot of planes use https://en.wikipedia.org/wiki/Skydrol instead of regular mineral-oil-based hydraulic fluid, despite the former being far more irritating for human handling.
Re:CA crews handle tricky fire at Tesla factory by SiempreViernes on Friday March 12, 2021 @09:14PM (#26443287)
Well, maybe they hadn't gotten around to putting it in yet? Supposedly the building was still under construction.
Re:CA crews handle tricky fire at Tesla factory by olivermarks on Friday March 12, 2021 @09:27PM (#26443346)
You'd think fire regulations would need to be adhered to before production was allowed to start. Small businesses have endless compliance check ups for this type of thing and big fines if they don't have safety and fire suppression in order
Re:CA crews handle tricky fire at Tesla factory by londons_explore on Saturday March 13, 2021 @03:48AM (#26445102)
I suspect the machine itself was also under construction. Someone was probably doing tests on it when it caught fire due to some design issue (like the hydraulic hoses touching the pipes where the molten aluminium flows)
Re:CA crews handle tricky fire at Tesla factory by SonOfKyuss on Saturday March 13, 2021 @02:09PM (#26449031)
Elon may be a visionary, but his disdain for regulations is well documented.
Re:CA crews handle tricky fire at Tesla factory by justapassenger on Friday March 12, 2021 @10:07PM (#26443543)
That press in literally in a tent on a parking lot. There’s lots of things that are missing, from what would be considered normal operating conditions for equipment like that.

Silicon Valley spirit of move fast and break things is still strong with them.

Re:CA crews handle tricky fire at Tesla factory by nickik on Friday March 12, 2021 @10:25PM (#26443630)
Nonsense, its not in a tent. Its a dedicated building to house the press. See it being constructed here:

See: https://cdn.shopify.com/s/files/1/0173/8204/7844/articles/3_...

Re:CA crews handle tricky fire at Tesla factory by justapassenger on Friday March 12, 2021 @10:32PM (#26443663)
Good point, not a tent. It’s much closer to a carport.
Re:CA crews handle tricky fire at Tesla factory by kiallmacinnes on Saturday March 13, 2021 @09:16AM (#26446695)
Based on the photo above - it's a purpose built structure designed to house that exact machine. What makes you think it doesn't meet the machines operating requirements?
Re:CA crews handle tricky fire at Tesla factory by manicdee on Sunday March 14, 2021 @04:18PM (#26458672)
Just because the walls weren’t there when the photo was taken doesn’t mean it will never have walls.