> This standard is not meant to define the proper method for brewing tea intended for general consumption, but rather to document a tea brewing procedure where meaningful sensory comparisons can be made. An example of such a test would be a taste-test to establish which blend of teas to choose for a particular brand or basic label in order to maintain a consistent tasting brewed drink from harvest to harvest.
On the other hand, it's very strange to me that the type of tea is not specified. Pouring boiling water over anything other than black tea typically destroys the aroma completely, and green tea in particular turns bitter and extremely taninnous. Also, 6 minutes of infusion sounds extreme for green or oolong or white tea.
For green tea, the nicest taste I've gotten by far is from very short brews with medium temperature (~80C) water with large quantities of tea, drinking 2-4 infusions from the same leaves. I've never measured the quantity in grams, but after the tea expands, it would typically fill the brewing pot.
The so-called gong fu method of preparation.
Average where? The most standard Ikea cup [1] that I can see in all the offices around here is 8oz, which is around 230ml. Personally, I drink coffee from that, but for tea, I always use some of the 10oz cups, which is more along the line of 300ml. A tea bag for 300ml is perfectly acceptable in my mind.
[1] https://www.ikea.com/us/en/p/faergrik-mug-stoneware-white-60...
I've never seen anyone drink a teabag out of an espresso cup. You can, but it's non standard.
That cup cited is four ounces, an espresso is one ounce.
I primarily want to say how much I like the parent comment's writing. It is very evocative — "the tea sat tangibly in my stomach", eg, is the sort of description I'd expect in a well-written novel. Kudos nimbius.
Separately, I fully agree w/ the above point about a 2:100 ratio being well too much. The tea shop from which I buy generally recommends ~2g loose for a 175ml cup, but I still find this to be too strong at anything except a minimal brewing time. I tend to use about 1g/cup, ie a bit over 0.5% by weight.
> meter out a 1 litre pot of water. now meter out 18-20 grams of loose green tea. what you brew (if you attempt it) will be flat-out undrinkable.
You've ignored the maximum size of the pot.
> If a large pot is used, it should hold a maximum of 310 ml (±8 ml) and must weigh 200 g (±10 g).
> If a small pot is used, it should hold a maximum of 150 ml (±4 ml) and must weigh 118 g (±10 g).
Try this experiment. meter out a 1 litre pot of water. now meter out 18-20 grams of loose green tea. what you brew (if you attempt it) will be flat-out undrinkable.
There has GOT to be something better than the ISO standard here.
EDIT:
I just tried to do this again with a green lower grade Xinyang Maojian and it tasted like the over-steeped dreck conjured up in an airport coffee chains platitude scrawled cardboard cups. the cup was rich, but the astringency was like trying to drink a cup of drywall. It was utterly wasteful for anything more than just testing and the comical amount of tea I used to attempt this left me with a sense of remorse. The tea I made sat tangibly heavy in my stomach.
It is a standard, and I guess I never stopped to consider what a standard means and thats what this standard does a particularly great job of doing. Yes, Starbucks adheres to this standard and if you buy a venti will gladly (sometimes reluctantly) give you four tea bags in the cup but for the love of god yank them out after a minute or two at most lest youre looking to start up your own tannery in the terminal. Its quite strange to think of a standard as something you shouldn't make a habit of.