I'm guessing one advantage Tesla has over traditional automakers is their entire company has been built around the existing regulatory environment. I'd be willing to bet their recertification process is quite streamlined compared to companies that have iteratively patched it on to their tradition vehicle design processes. Just a guess though; I have no background knowledge on this topic.
I highly doubt that the traditional carmakers are slowed down by regulations.
Would be cool to find someone who has actual insights to ask this.
You can generally tell what revisions are straight-forward to certify and which are not by noting common year-to-year changes in a model.
It's 100% a design fault, and applies equally to any car of this model (I tested it on a friends, same result!). There are simple reproduction steps which can totally happen by accident, yet there has been no recall or service bulletin issued.
I ended up pulling the power steering controller apart and adding my own safety circuit to the microcontroller output so my car is now the only car of this model which won't break your thumbs or steer you into a ditch!
I've noticed that automakers are about 60 years behind aircraft makers in design methodologies that prevent things like hardovers due to single component failures.
I'm not exaggerating about the 60 years thing. I worked in Boeing engineering 40 years ago and the "no single component failure causing a crash" was the rule and literally the law.
(A lesson Boeing had to relearn with the 737MAX MCAS system.)
Nuclear reactors (Fukishima) and drilling rigs (Deepwater Horizon) are far behind, too.
So park the car for a few months, then go to unpark it on a cold night... Not at all rare!
The recall I can find is to replace 3 bolts that can corrode due to salt which would cause loss of power steering.
I’m not sure what runaway power steering is?