It's 100% a design fault, and applies equally to any car of this model (I tested it on a friends, same result!). There are simple reproduction steps which can totally happen by accident, yet there has been no recall or service bulletin issued.
I ended up pulling the power steering controller apart and adding my own safety circuit to the microcontroller output so my car is now the only car of this model which won't break your thumbs or steer you into a ditch!
I've noticed that automakers are about 60 years behind aircraft makers in design methodologies that prevent things like hardovers due to single component failures.
I'm not exaggerating about the 60 years thing. I worked in Boeing engineering 40 years ago and the "no single component failure causing a crash" was the rule and literally the law.
(A lesson Boeing had to relearn with the 737MAX MCAS system.)
Nuclear reactors (Fukishima) and drilling rigs (Deepwater Horizon) are far behind, too.
So park the car for a few months, then go to unpark it on a cold night... Not at all rare!
The recall I can find is to replace 3 bolts that can corrode due to salt which would cause loss of power steering.
I’m not sure what runaway power steering is?