News for hackers. Stuff that matters.
Re:Nobody ever ported Doom to run on a Cray 1 by grawprog on Monday December 21, 2020 @12:10PM (#25496895)
Well...since this is on HN, I wonder how long it's going to be before the new Cray 1 port of doom comes out.
Re:Nobody ever ported Doom to run on a Cray 1 by vidanay on Monday December 21, 2020 @12:12PM (#25496932)
I'm disappointed they never released a Cray Z computer.
Re:Nobody ever ported Doom to run on a Cray 1 by mhh__ on Monday December 21, 2020 @12:34PM (#25497172)
Has anyone got one lying around?

(It draws a mere 100kW at the wall, I'm guessing no)

Re:Nobody ever ported Doom to run on a Cray 1 by quickthrowman on Monday December 21, 2020 @12:54PM (#25497386)
It actually has a 150kW 208v 3-phase generator set that provides power to the power distribution cabinet which then uses variacs to transform the voltage to 5v. The genset has a theoretical current output of 415A, pretty serious power!

https://www.edn.com/cray-1-super-computer-the-power-supply/

Re:Nobody ever ported Doom to run on a Cray 1 by anonymousiam on Monday December 21, 2020 @02:15PM (#25498297)
Ohm's Law says 5.2V @ 770A is only 4.004kW. With one of these on each of the three phases, that's a total of 12,012kW.

So where did the rest of the power go, into cooling? Perhaps it was a linear power supply instead of a switcher? That would make for lots of inefficiency.

Re:Nobody ever ported Doom to run on a Cray 1 by kens on Monday December 21, 2020 @02:26PM (#25498403)
The Cray-1 has 36 power supplies: 20 that supply -5.2 volts, and 16 that supply -2.0 volts. (The weird negative voltages are for ECL, the fast logic family used in the Cray.) The bench around the Cray holds the power supplies.

Interestingly, the power supplies themselves are unregulated; regulation is done by the motor-generator unit.

Re:Nobody ever ported Doom to run on a Cray 1 by fiddlerwoaroof on Monday December 21, 2020 @01:39PM (#25497916)
Just plug it in at a supercharger.
Re:Nobody ever ported Doom to run on a Cray 1 by EarthLaunch on Monday December 21, 2020 @08:03PM (#25501711)
Looks like most superchargers supply exactly 150kW (newer ones supplying 250kW) [1].

1: https://en.wikipedia.org/wiki/Tesla_Supercharger

Re:Nobody ever ported Doom to run on a Cray 1 by fiddlerwoaroof on Monday December 21, 2020 @08:05PM (#25501728)
Yeah, that was the joke :) It helped put the power draw in perspective for me.
Re:Nobody ever ported Doom to run on a Cray 1 by EarthLaunch on Monday December 28, 2020 @08:31PM (#25565608)
For me too, thanks :) Interesting given the decades lag.
Re:Nobody ever ported Doom to run on a Cray 1 by AnimalMuppet on Monday December 21, 2020 @01:58PM (#25498121)
Sounds like a good thing to not touch by accident...
Re:Nobody ever ported Doom to run on a Cray 1 by CrayBoy on Monday December 21, 2020 @02:35PM (#25498516)
It's not Cray if the bowels; don't touch. Merry Christmas. May the light shine upon yous. < 3
Re:Nobody ever ported Doom to run on a Cray 1 by grawprog on Monday December 21, 2020 @12:40PM (#25497225)
Re:Nobody ever ported Doom to run on a Cray 1 by Nomokis on Monday December 21, 2020 @02:36PM (#25498528)
Man, this guy has some great articles.

http://www.chrisfenton.com/cray-1-digital-archeology/

http://www.chrisfenton.com/cos-recovery/

I just wish he'd made higher resolution pictures.

He's also seriously hardcore (or maybe I feel out of depth because I'm a software guy):

> I built a robot that would manually move the head forward 1/5200th of an inch at a time (there are 400 data tracks per inch, so this gives me a whopping 13 steps per data track!), while a high-speed analog-to-digital converter would take the analog signal straight from the drive’s read amplifier and buffer it into an FPGA at a blistering 80 million samples-per-second (like I said earlier, the theme here was overkill…the data was only changing at ~10 MHz or so)

Related: http://www.modularcircuits.com/blog/articles/the-cray-files/

Re:Nobody ever ported Doom to run on a Cray 1 by fentonc on Monday December 21, 2020 @08:58PM (#25502045)
Lol - the 'overkill' approach was mostly one of expediency, since I had spent most of the summer I had to work on this project just trying to get my hands on the disk drive and then powering it on without blowing a fuse. I only had 2-3 weeks to throw everything together, so the 'robot' was basically the Z-stage of a Makerbot 3D printer with some acrylic widgets to push the read-head, then the signal was fed into an analog comparator chip and then into a shift register in my FPGA board. The craziest part is that it worked, and I was able to recover the data!
Re:Nobody ever ported Doom to run on a Cray 1 by mhh__ on Monday December 21, 2020 @06:38PM (#25501102)
Very nice.

The FPGA thing isn't that inaccessible to normies like us (i.e. some FPGA Dev boards will easily cost thousands and thousands), but the ecosystem is a complete clusterfuck so getting started is the hard bit. Obviously you need to know electronics too but 80MSPS will let you get away with a lot (The term is signal integrity) of bad circuitry (as I can attest to...).

Verilog isn't too bad as long as you treat it as a description of a circuit (in a language from the past, not even mentioning VHDL...)

Re:Nobody ever ported Doom to run on a Cray 1 by 83457 on Monday December 21, 2020 @12:38PM (#25497214)
Computer History Museum had one when I stopped by about 10 years ago. Not certain if operational as anything other than a cozy bench. Anyone know?
Re:Nobody ever ported Doom to run on a Cray 1 by kens on Monday December 21, 2020 @02:28PM (#25498431)
No, the Cray is not operational. Only a few things at the CHM are operational: the PDP-1, the IBM 1401 lab, and the RAMAC disk drive.
Re:Nobody ever ported Doom to run on a Cray 1 by macjohnmcc on Monday December 21, 2020 @03:02PM (#25498887)
When I was in high school we had a PDP System 10 and PDP 11 where I took a programming course on PDP-11 assembly language. It makes me feel old knowing these weren't antiquated at the time.
Re:Nobody ever ported Doom to run on a Cray 1 by ficklepickle on Monday December 21, 2020 @05:19PM (#25500316)
Wow! Did you ever meet Charles Babbage? ;)
Re:Nobody ever ported Doom to run on a Cray 1 by macjohnmcc on Monday December 21, 2020 @08:48PM (#25501970)
No but something nearly as bad was typing on punch cards and having to feed them into a card reader to get the code into the computer. And all but one of the terminals was a TTY at 110baud and printed on paper. There was a single Dec VT100/102 terminal you had to get in early to use.
Re:Nobody ever ported Doom to run on a Cray 1 by mhh__ on Monday December 21, 2020 @01:04PM (#25497519)
They used Freon coolant so it's possible they can't/won't
Re:Nobody ever ported Doom to run on a Cray 1 by Geezus_42 on Monday December 21, 2020 @01:34PM (#25497841)
Couldn't they use one of the freon substitutes like R-407c?
Re:Nobody ever ported Doom to run on a Cray 1 by mhh__ on Monday December 21, 2020 @01:36PM (#25497875)
Not my area of expertise but if I had a literally priceless old supercomputer, I wouldn't necessarily want to risk running it outside of its intended operating conditions (especially after 40 years)
Re:Nobody ever ported Doom to run on a Cray 1 by tinus_hn on Monday December 21, 2020 @01:30PM (#25497807)