News for hackers. Stuff that matters.
Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by snvzz on Monday October 19, 2020 @06:56AM (#24825104)
A port[0] of FPGAPCE[1] exists for the miSTer[2]. This is all open source.

What does this commercial, proprietary, closed solution offer, if anything, over that?

[0] https://github.com/MiSTer-devel/TurboGrafx16_MiSTer

[1] https://github.com/Torlus/FPGAPCE

[2] https://github.com/MiSTer-devel/Main_MiSTer/wiki

Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by whywhywhywhy on Monday October 19, 2020 @07:19AM (#24825256)
>What does this commercial, proprietary, closed solution offer, if anything, over that?

Honestly, the same thing is almost always offers. Nicer hardware and user experience design.

Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by dfxm12 on Monday October 19, 2020 @09:12AM (#24826013)
People want to get up and put their Hu-Card, Turbo-Chip or CD-ROM into their console. That's really the secret sauce here. I don't know if open source hu-card/turbo chip readers exist or if you can use one with the MiSTer. They also want to use their original controllers, but I think this is an easier hurdle to overcome.

It also looks like the Analogue device is cheaper than a DE-10 + necessary modules.

Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by christoph on Monday October 19, 2020 @10:23AM (#24826624)
The DE-10 is only about $140 in the US I believe and the 128MB SDRAM module is around $60, so they work out to pretty similar prices, although there are still no decent Mister cases. Do consider for that outlay though, Mister supports a ton of other systems (pretty much any 16-bit or earlier console/computer).

Mister doesn't have any support for any type of cartridge readers for any of the systems supported and I don't believe there is any plan to ever support this, it is all SD card based loading.

Mister works with pretty much any controller you can throw at it - original controllers through SNAC, bluetooth & USB.

Also, something missing from the Analogue console is analog output - RGB scart, VGA, etc. You can fairly easily do this with Mister now without any of the analog video add on boards.

Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by jakemauer on Monday October 19, 2020 @02:08PM (#24829056)
My guess is that the Analogue TG-16 console will support their proprietary DAC add-on that connects via the console's HDMI port.
Re:Analogue Duo: FPGA Based TurboGrafx-16/PC Engine Clone by snvzz on Friday October 23, 2020 @10:47AM (#24870023)
Cheaper is at least debatable[0].

[0]: https://felixleger.com/posts/20201018-misterfpga/