News for hackers. Stuff that matters.
Re:Nvidia announces Jetson Nano 2GB, a single board computer by fgblanch on Monday October 05, 2020 @10:45AM (#24688206)
Very recently I recovered my rock too. I'm about 20 hours in. Any repository or helpful documentation to save part of the 80 remaining hours? pleaaaasee
Re:Nvidia announces Jetson Nano 2GB, a single board computer by slezyr on Monday October 05, 2020 @11:00AM (#24688342)
1.) Forget about EMMC, it's gone and not supported by anyone.

2.) Boot is only possible from microSD card. USB is not supported.

3.) Build BareBox with https://www.barebox.org/doc/latest/boards/rockchip.html

Use `rk-splitboot` to split FlashData from the original boot loader, other option doesn't work. Build it, it will create barebox-radxa-rock.img. It's .img, not the .bin.

Write an SD card as in the instruction.

4.) Follow these instructions, but use the generic image.

https://archlinuxarm.org/platforms/armv7/amlogic/odroid-c1

http://os.archlinuxarm.org/os/ArchLinuxARM-armv7-latest.tar....

5.) Build kernel as in this tutorial, ignore the `dts` stuff. The `dts` comes with the kernel sources.

https://wiki.radxa.com/Rock/Linux_Mainline

https://github.com/torvalds/linux/blob/master/arch/arm/boot/...

6.) Copy the zImage, rk3188-radxarock.dts to the /boot and plug in the UART.

7.) sudo picocom /dev/ttyUSB1 -b 115200 -e w

8.) Boot in the bootloader and execute the following commands:

global.bootm.appendroot=true

global.bootm.image=/mnt/mshc1.0/boot/zImage

global.bootm.oftree=/mnt/mshc1.0/boot/dtbs/rk3188-radxarock.dtb

bootm

9.) If it boots, you can make it permanent by following the BareBox docs.

Re:Nvidia announces Jetson Nano 2GB, a single board computer by ndesaulniers on Monday October 05, 2020 @02:58PM (#24690820)
Are you statically compiling in the kernel modules? (Would have expected some .ko's to need copying too, beyond the kernel image and device tree pieces.)
Re:Nvidia announces Jetson Nano 2GB, a single board computer by fgblanch on Monday October 05, 2020 @11:05AM (#24688387)
Woow HUGE thanks!
Re:Nvidia announces Jetson Nano 2GB, a single board computer by slezyr on Monday October 05, 2020 @11:16AM (#24688484)
Forgot the most important one - power it by using power cable that came with it and the 5V _2A_ adapter. It will kernel panic at random places if you power it from the USB port.
Re:Nvidia announces Jetson Nano 2GB, a single board computer by imposterr on Monday October 05, 2020 @12:09PM (#24689013)
Oh geez. How did you even figure this one out?
Re:Nvidia announces Jetson Nano 2GB, a single board computer by NikolaeVarius on Monday October 05, 2020 @12:28PM (#24689221)
This sort of thing isn't that weird in small cheap devices. They more or less demand clean power, which is why the Pi4 is heavily recommended to be used with their official charger.

I find it gets unstable with cheaper USB C chargers.

I specifically buy high quality chargers/cables/battery packs for my embedded work since they are so intolerant of bad power

Re:Nvidia announces Jetson Nano 2GB, a single board computer by rckoepke on Monday October 05, 2020 @01:04PM (#24689610)
What are your recommended brands of USB chargers?