What does it cost to dig and maintain a 1.5km deep shaft?
I found is something around 8000-10000$ per meter. I can buy a whole lot of batteries for that.
This technology just does not scale since mgh always holds true.
Unlike flywheels where you get w^2.
Just making the wheel out of carbon fiber and making them go fast, squares the amount of energy you can store.
https://www.storage-lab.com/gravity-based-storage https://www.osti.gov/biblio/6517343
But mostly they won't be digging the holes, they will be using shafts left over from earlier mining operations.
https://minewiki.engineering.queensu.ca/mediawiki/index.php/...
Honestly i would have thought it to be more expensive.
At higher depths the ground pressure is enormous and you need a lot of bracing.
Then there is water management, air, transportation of the dug out material...
When there is rock you usually need blasting or gargantuan drills which i am not sure even exists in the required diameter.
And the much bigger issue is, you have to constantly pump out water that will inevitably fill the hole. And that only costs you money.
1) Pumps that can pump water 150 meters or a kilometer high are very expensive and require constant expensive maintenance.
2) Where will you pump the water to? Now you have to build huge storage tanks.
3) The water never stops flowing in. Sooner or later you will run out of storage space and your expensive hole will fill up with water.
There is no way, short of fusion that I know of. And fusion is not a valid answer in this context anyway (even if we had the tech for it).
But at that point, why wouldn't you just do a classic pumped-storage reservoir?
Furthermore, my most optimistic estimates show that underground solid mass gravity storage could compete with pumped hydro on cost anyways. One reason is that solid mass is about 2.5x heavier than water. If excavation is one of your biggest costs, this density is important.
Maybe if you are lifting the entire city. For perspective, take electric vehicles. Each moving EV is a mass being constantly accelerated at say 0.1G. So the weight in the graviticity system to power those EVs would have to be at least 10% of the mass of all the EVs active in a city.
This would be a really cool element in a sci-fi world
https://sipilpedia.com/tecorep-system-high-tech-demolition-s...
365000 tons × 9.81 m/s2 × 1 m = 1 MWh
which ought to at least be enough to provide short term backup power to the whole building.
Each unit can be configured to produce between 1 and 20MW peak power, with output duration from 15 minutes to 8 hours.
For reference, 20MW is ~4 large aerogenerators. A single nuclear PWR is 500-1000MW.
It can scale up to provide 1 GW of storage - enough to balance the load of an entire large city.
You'd need 50 of these installations for a single city, for 15 minutes of power, 1000 for the 8 hours.
Lots of these ideas are popping up right now because it's a very compelling idea which is demonstrated to work. And because climate change is driving massive growth in renewable energy (woot) we will desperately need massive amounts of energy storage in the very new future. The energy storage market is expected to grow massively year over year.