MicroBridge is an Android Debug Bridge (ADB)
implementation for microcontrollers. MicroBridge allows
stock, unrooted Android devices to talk directly to USB
host enabled MCUs, thereby enabling phones to actuate
servos, drive DC motors, talk to I2C and SPI devices, read
ADCs, and so forth.
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by dkersten on Friday April 08, 2011 @10:45AM
(#2423994)
This is really cool!
I've spent the past few weeks working on this[1] with my brother (he built the case and wired/soldered everything; I handled the firmware) and I can think of some awesome applications for this Android board. I'm really excited about the idea of building an Android powered MIDI controller now :)
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by JonnieCache on Friday April 08, 2011 @10:49AM
(#2424005)
Beautiful work! I love the arcade cabinet style buttons. What kind of things are you looking to trigger with it? I imagine mashing up breakbeats with those buttons would be really compulsive :)
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by dkersten on Friday April 08, 2011 @11:12AM
(#2424108)
Thanks!
My brother plans on using it for DJing with Traktor.
The ideas is that you never ever need to touch a laptop while DJing. I would love to extend it to use an android phone as a display (so that the laptop can be hidden away under the table or whatever).
At the moment, we have 4 banks which change the MIDI channel of everything else, and 4 banks for the 16 midifighter buttons. These four banks basically map to each one of four Traktor decks. The 4 "global" banks are then used to choose between browsing through songs, loops, various deck control commands and effects.
I imagine mashing up breakbeats with those buttons would be really compulsive :)
Its addictive to mash the buttons and see what happens :D Even an unmodded midifighter provides hours of fun, even if (like me and unlike my brother) you're not terribly musical.
Anyway, we had a little setback - think we may have fried the atmel mcu.. :'( but once its all finished and cleaned up, I intend on releasing the code and writing a blog post about it, which I'll probably submit to HN.
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by ck2 on Friday April 08, 2011 @09:35AM
(#2423672)
That visual charger is slick.
A little OT, but does anyone understand why there aren't usb-to-ethernet adapters for android devices? I have an environment where I cannot use wifi but want network connectivity.
Unless I have misunderstood the adb docs, it shouldnt be too hard to set up, even though it only seems to allow ports to be forwarded from the host to the phone, rather than the other way around. Nimble use of netcat/iptables should remedy this.
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by sfgfdhgfdshdhhd on Friday April 08, 2011 @01:08PM
(#2424685)
Genious!
Does anyone know if there are similar equipment for PCs?
I want to hook up a laptop to some electronics equipment for data logging.
Arduino boards are pretty slick but they need some wrapping to work smoothly, i want to have more recommendations.
For clarification, i want the I/O API to be targeted for a program running on the PC. I don't want to write a wrapper in the microcontroller myself and then transfer it over serial port to PC. I want the microcontroller block to be transparent. PC<--->Microcontroller<--->I/O
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by JonnieCache on Friday April 08, 2011 @01:21PM
(#2424745)
All development boards will have a USB interface which generally comes up as a serial port. You can then just fire bytes back and forth in whatever way you please.
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by follower on Friday April 08, 2011 @10:30PM
(#2426320)
You probably want to take a look at Firmata:
http://firmata.org/wiki/Main_Page
It basically does the wrapping for you, so you can control the Arduino from your PC using software you're already familiar with: Python, MaxMSP, Processing, PD etc
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by JonnieCache on Friday April 08, 2011 @04:46PM
(#2425539)
You can always chop the end off an old parallel cable and manipulate the state of each pin using whatever language you want on the PC. It's known as 'bit-banging' I believe. It's a simple way to do GPIO.
Re:Meet the IOIO - USB breakout board for android w/48 digit...
by sfgfdhgfdshdhhd on Tuesday April 19, 2011 @01:47PM
(#2463429)
This seems to be exactly what i'm looking for. I also find some similar firmware[1] for AVR in case you want to do the same on an arduino or other avr-based construction. Thinking about it just writing the code targeted directly for the µC isn't that complicated. Even though it's nice to have the communication firmware done for you already.
Pre-order here: http://www.sparkfun.com/products/10585 ($49.99)
http://www.sparkfun.com/products/9947
http://code.google.com/p/microbridge/
MicroBridge is an Android Debug Bridge (ADB) implementation for microcontrollers. MicroBridge allows stock, unrooted Android devices to talk directly to USB host enabled MCUs, thereby enabling phones to actuate servos, drive DC motors, talk to I2C and SPI devices, read ADCs, and so forth.
I've spent the past few weeks working on this[1] with my brother (he built the case and wired/soldered everything; I handled the firmware) and I can think of some awesome applications for this Android board. I'm really excited about the idea of building an Android powered MIDI controller now :)
[1] http://www.djtechtools.com/forum/showthread.php?t=28014
My brother plans on using it for DJing with Traktor.
The ideas is that you never ever need to touch a laptop while DJing. I would love to extend it to use an android phone as a display (so that the laptop can be hidden away under the table or whatever).
At the moment, we have 4 banks which change the MIDI channel of everything else, and 4 banks for the 16 midifighter buttons. These four banks basically map to each one of four Traktor decks. The 4 "global" banks are then used to choose between browsing through songs, loops, various deck control commands and effects.
I imagine mashing up breakbeats with those buttons would be really compulsive :)
Its addictive to mash the buttons and see what happens :D Even an unmodded midifighter provides hours of fun, even if (like me and unlike my brother) you're not terribly musical.
Anyway, we had a little setback - think we may have fried the atmel mcu.. :'( but once its all finished and cleaned up, I intend on releasing the code and writing a blog post about it, which I'll probably submit to HN.
You should submit to http://hackaday.com as well. They'd most likely feature it.
Also, have you heard of http://hexler.net/touchosc ? It's brilliant fun on the ipad, I've never tried it on android, but there is a port.
Touchosc looks interesting too, I'll have to give it a try.
A little OT, but does anyone understand why there aren't usb-to-ethernet adapters for android devices? I have an environment where I cannot use wifi but want network connectivity.
http://developer.android.com/guide/developing/tools/adb.html...
Unless I have misunderstood the adb docs, it shouldnt be too hard to set up, even though it only seems to allow ports to be forwarded from the host to the phone, rather than the other way around. Nimble use of netcat/iptables should remedy this.
EDIT: people seem to be calling it "reverse tethering" and while it involves the adb, it doesnt use the port forwarding. See: http://blog.mycila.com/2010/06/reverse-usb-tethering-with-an...
Here's some code showing how to mess with networking on Android: http://code.google.com/p/android-wifi-tether/
The IOIO works by acting as a USB host itself.
I've seen a usb tunnel for iphone but never anything for android.
Of course, it would be easier to buy if it were on SparkFun...
Does anyone know if there are similar equipment for PCs? I want to hook up a laptop to some electronics equipment for data logging.
Arduino boards are pretty slick but they need some wrapping to work smoothly, i want to have more recommendations.
For clarification, i want the I/O API to be targeted for a program running on the PC. I don't want to write a wrapper in the microcontroller myself and then transfer it over serial port to PC. I want the microcontroller block to be transparent. PC<--->Microcontroller<--->I/O
For a comparison of different boards, see: http://hackaday.com/2011/02/01/what-development-board-to-use...
1. http://www.recursion.jp/avrcdc/cdc-io.html#usage