The radios are small hand held transceivers with 22 channels. The radios are $10-40 each.
A step up from FRS is GMRS (General Mobile Radio Service). It is similar to FRS, but had 30 channels (the 22 of FRS plus 8 more), higher power limits, and does require a licenses. GMRS users are allowed to talk with FRS users on their shared channels.
A GMRS license does not require any testing. You just fill out a form and pay a fee (around $85, I believe). It's good for 10 years.
Thing is, amateur radio is a really deep universe and there's almost no end to how much stuff you can learn or experiment with or try, so it takes a while to get a feel for things and know what you want out of it. You say you have a lot of hobbies - this can so easily be another one, a potentially massively-time-consuming one hahaha :)
Since you're probably intending just fairly short-range group<->group communication you probably want a typical handheld VHF radio. An "HT" as it's often called, or "handie-talkie". You can get cheap ones as low as like $50 but more often around $100. Baofeng makes the cheapest ones (I got one for $20), but they may not be legal to transmit with in your region, depends on where you're located. I only use one to listen for trucks on logging roads, or as a backup emergency radio. You won't really need digital modes like DMR or D-Star, in my opinion. In terms of how to use, the radios always come with comprehensive manuals that explain all the functions and how to use them. I learned everything I need to know to use my radio from the manual. You can probably buy one used, or scour some forums to know what the most reputable radio equipment vendors are. It's definitely a lot easier to get into this stuff if you know someone who's already into it, as everyone is into radio for different things. That said, ARRL has a decent "Get on the Air" site which you might find useful! Check it: http://www.arrl.org/get-on-the-air
Hope this helps a bit, even if it's just some general info... Can answer other questions if you have some. :)
https://www.dxengineering.com/search/part-type/handheld-tran...
Once you have it, check https://www.repeaterbook.com/ and program in what's local to you.
The answers to all your questions are there. (You don't have to join a club.) Lots of videos for people in your situation.
One example: "The first ham radio you should buy" by Ham Radio Crash Course: https://youtu.be/A4Udu-WdwK0
fwiw, I also got into radio for the same reason as you. A few years ago, on our trip to Isle Royale National Park, one of the other adult leaders had an emergency (broken foot; needing National Park Service rescue...) and we didn't have a ham radio. We did have a satellite communicator (Garmin inReach), so we weren't completely screwed. But from now on, I'd like to always have a ham radio (in addition to the inReach) on me for future trips.
Should keep you busy and learning!
The electromagnetic spectrum is a limited resource; an amateur radio license is a license to do certain kinds of experiments in the spectrum. The kind of activity that makes up these experiments when done by someone who doesn't know what they're doing has the potential to cause harm which is hugely disproportionate to the amount of effort it would take to do it. While it's possible to pinpoint individual offenders, if unlicensed activity was widespread then the ability to do so would be overwhelmed.
But I agree this was never the intention of the license.
Aside: 4W is for AM. You can do a little more (12W iirc) on SSB because it's spread more evenly across the bandwidth being used.
The main technical restriction is simply that at the frequencies that CB typically operates at an FM modulation mode would use too much bandwidth. Enter the UHF version of CB which allows for FM modulation.
No, FM is not allowed, see below.
SSB is basically AM with a suppressed carrier. (i.e. In SSB, Frequency deviation is the demodulated frequency, whereas with FM frequency deviation is the demodulated amplitude.) (You're not wrong in calling it improved, I'm just expanding on how for anyone else reading.)
FWIW, You're not allowed to broadcast music on CB, but that doesn't stop people either.
§ 95.971 CBRS emission types.
Each CBRS transmitter type must be designed such that its capabilities are in compliance with the emission type rules in this section.
(a) Permitted emission types. CBRS transmitter types may transmit only AM voice emission type A3E and SSB voice emission types J3E, R3E, or H3E.
(b) SSB requirements. Each CBRS transmitter type that transmits emission type J3E, R3E, or H3E must be capable of transmitting only the upper sideband with suppressed, reduced or full carrier, respectively, but may additionally be capable of transmitting only the lower sideband, with suppressed, reduced or full carrier, respectively.
A3E or A3EG -Ordinary amplitude modulation used for low frequency and medium frequency AM broadcastingJ3E - SSB speech communication, used on HF bands by marine, aeronautical and amateur users
R3E - SSB with reduced carrier (AME) speech communication, primarily used on HF bands by the military (a.k.a. compatible sideband)
H3E - AM, single sideband, full carrier
But yes, even narrow FM would be too wide at 10-15kHz.
§ 95.973 CBRS authorized bandwidth.
Each CBRS transmitter type must be designed such that the occupied bandwidth does not exceed the authorized bandwidth for the emission type under test.
(a) AM. The authorized bandwidth for emission type A3E is 8 kHz.
(b) SSB. The authorized bandwidth for emission types J3E, R3E, and H3E is 4 kHz.
"Enter the UHF version of CB which allows for FM modulation." That could be interesting, but would be even more line-of-sight than CB is.which you just did, by quoting US law. FM on CB is normal in other places.
Then pointlessly expounds. It's like the person that doesn't listen because they are so concerned with what they are going to say
If we want to nitpick, it's pointless to talk about cb outside the context of a country. The frequency ranges, power, and allowed modulation are all different. You can do any modulation you want at a cb frequency, whether that's allowed is entirely specific to the country.
Slightly depends on the specific country: in Germany some channels also allow AM and SSB.
You need to consider the big picture. Ham radio is just one of several radio services. They have different licensing requirements depending on their purpose and/or who is meant to use them.
For services that are aimed at people who just want to communicate, getting a license won't involve anything like schematic diagrams--if a license is even required.
The ham radio service's target is radio geeks. Hams are given considerably more leeway in what they can do with radio than are users of most other services, and so the licensing requirements include more things concerning the underlying technology than you need to just operate a radio reasonably.
For people who might be interested in what those 'unlicensed' services are, they include:
- FRS (the Family Radio Service[0]), which is typified by the sort of $20 bubble pack radios you can buy at a sporting goods store;
- MURS (the Multi-Use Radio Service[1]), which is common in commercial radios used by e.g. staff at big box stores;
- CBRS (the Citizens Band Radio Service[2]), which is probably familiar to most from "any movie involving truck drivers".
These services may have licensing/approval rules for equipment, but not for individuals using them.
[0] https://www.fcc.gov/wireless/bureau-divisions/mobility-divis...
[1] https://www.fcc.gov/wireless/bureau-divisions/mobility-divis...
[2] https://www.fcc.gov/wireless/bureau-divisions/mobility-divis...
The FAA private pilot's license is often described as a "license to learn", for example: it gives you the technical permission to fly aircraft that are entirely unsuitable for someone who has as few as 40 hours flight time; even the right to be the test pilot for an aircraft that you built for yourself!
Both licenses are intended to help you with the foundational framework for success, like: what are the regulatory limits? how should I think about my personal limits? what's potentially dangerous? where and how can I learn more than the basics?
Technically yes, but these requirements are pretty much the same globally, because they're copy-pasted from the ITU. Ham radio is practically governed by international law and quite possibly the field with the least diverse regulations in the world.
They have a new magazine specifically for newbies:
http://www.arrl.org/On-the-Air-Magazine
Ham radio is a very diverse activity. Some hams prefer the technical end, others the social aspects. You'll find your preference once you get started.
you being not interested in joining a club is not a good reason to blame the certification.
the certification is about being able to evaluate components to buy, both off-the shelf and for self-building.
- their previous "armor 3WT" does PMR-466 and traditional VHF with 2W on 400-470MHz and feature a 10 Ah battery : https://www.ulefone.com/armor-3wt.html?PageName=specs
- their latest "armor" does FLIR thermal imaging and endoscopy (currently on the homepage)
/diy/ always has an amateur radio general thread up if you want to ask questions.
This is self inflicted silliness on your part. Joining a club means access to online discussion as part of the club, ie what you'd do anyways.
What you don’t learn as part of getting a license is what do you do after you have a license. Where do you buy equipment? What kind of equipment do you need? How do you use a radio? What do all the buttons on the radio do? Etc.
I asked someone about this and they said I needed to join my local club to learn this stuff. But, I don’t want to join a club. I have a family, 2 jobs, home remodeling, and various hobbies (woodworking, drawing, reading, board games, baking, gardening, etc.) The last thing I have time for is to join a club ;-)
So I’m in this weird spot where I have a license, but don’t actually know what to do with it. Due to the pandemic, the youth trip was cancelled. But it may be rescheduled for a future year. I’ll need to figure all this stuff out before then.