News for hackers. Stuff that matters.
Re:Google offers free fabbing for 130nm open-source chips by pjc50 on Tuesday July 07, 2020 @04:23AM (#23756903)
> Is it plausible to get better performance/watt for a custom chip on 130nm vs a software application running on a 7m chip?

This very, very much depends on what the algorithm is (integer or FP? how data dependent?), but I would say no for almost all interesting cases.

The only exception would be if you're doing a "mixed signal" chip where some of the processing is inherently analogue and you can save power compared to having to do it with a group of separate chips.

Another exception might be low leakage construction, because that gets worse as the process gets smaller. This is only valuable if your chip is off almost all of the time and you want to squeeze down exactly how many nanoamps "off" actually consumes.

Re:Google offers free fabbing for 130nm open-source chips by awelkie on Tuesday July 07, 2020 @05:30AM (#23757285)
An open source WiFi chip would be super cool. I wonder how easy it would be to take the FPGA code from openwifi[0] and combine it with a radio on the same chip?

[0] https://github.com/open-sdr/openwifi

Re:Google offers free fabbing for 130nm open-source chips by pjc50 on Tuesday July 07, 2020 @06:00AM (#23757444)
The problem is that analogue IC design is a field that even digital IC design people regard as black magic. It's clearly possible for that to happen but the set of people who have the skills to do it is very narrow and most of them are probably prevented from doing it in their spare time by their employment agreements.

I wonder how many "test chips" Google will let a non-expert team do to get it right? And whether they provide any "bringup" support?

Re:Google offers free fabbing for 130nm open-source chips by Taek on Tuesday July 07, 2020 @09:23AM (#23758940)
A big part of the "black magic" really comes down to insufficient tooling. And at least in hardware, insufficient tooling comes down to the fact that everything is open source and trade secret, and teams pretty much refuse to share knowledge with each other.

An open source community would go a long way to fixing an issue like this, and these "black magic" projects are actually a fantastic place for the open source world to get started, because it's an area where there's a ton of room for improvement over the status quo.

Re:Google offers free fabbing for 130nm open-source chips by monocasa on Tuesday July 07, 2020 @12:08PM (#23760630)
They're only allowing parts that stay within the bounds of the PDK (which only allows digital designs) for now.
Re:Google offers free fabbing for 130nm open-source chips by yjftsjthsd-h on Tuesday July 07, 2020 @10:40AM (#23759737)
Even if you could technically make it work, I'd be very nervous around the legalities of that. Or is the Wi-Fi spectrum so unregulated that you can run without any certification at all?
Re:Google offers free fabbing for 130nm open-source chips by manquer on Tuesday July 07, 2020 @02:20PM (#23762327)
Certification has to do power of the signal and frequency. licensing is not required in some frequency bands like in 2.4 GHz used by WiFi.
Re:Google offers free fabbing for 130nm open-source chips by ac29 on Wednesday July 08, 2020 @12:26AM (#23766883)
WiFi equipment (and pretty much every other radio) requires certification in order to be sold in every country I am aware of. WiFI doesn't require a license to operate, but that doesn't mean you can just use any hardware you like (though I think there may be exceptions for hardware you build yourself, at least in the US).
Re:Google offers free fabbing for 130nm open-source chips by baybal2 on Tuesday July 07, 2020 @04:41AM (#23757005)
> Another exception might be low leakage construction, because that gets worse as the process gets smaller. This is only valuable if your chip is off almost all of the time and you want to squeeze down exactly how many nanoamps "off" actually consumes.

No, you actually have more leakage at older nodes, what changes is the ratio of current spent on leakage vs. current spent doing something useful.

Re:Google offers free fabbing for 130nm open-source chips by MayeulC on Tuesday July 07, 2020 @05:54AM (#23757411)
Doesn't leakage increase again below 22nm because of tunneling losses, though?

Of course, the lower gate capacitance allows for lower switching losses. But adiabatic computing could theoretically recover switching losses, allowing for higher efficiency at older nodes. That can be approached by using an oscillating power supply for instance, to recover charges. If someone was to design something like this for this run, it could be very interesting.

Now I'm wondering if this isn't some covert recruitment operation by Google: they will likely comb trough application, select the most promising ones, and the designers will get job offers :)

Re:Google offers free fabbing for 130nm open-source chips by baybal2 on Tuesday July 07, 2020 @07:32AM (#23758072)
> Doesn't leakage increase again below 22nm because of tunneling losses, though?

You have tunnelling losses on bigger nodes as well, they are just not that dominant. Dielectrics got better as nodes shrank, and this is the reason FinFETs became practical (which switch faster, and more reliably on smaller nodes, but leak worse.)