News for hackers. Stuff that matters.
Re:Print your own laboratory-grade microscope for US$18 by amelius on Monday May 04, 2020 @11:55AM (#23069513)
Isn't this just a holder that keeps the objective lens at the desired distance from the sample/camera?

And if you can buy the optical parts for cheap on Alibaba, then why not buy the holder there as well?

Re:Print your own laboratory-grade microscope for US$18 by mceachen on Monday May 04, 2020 @12:32PM (#23070051)
The project name is the answer to your question:

https://en.m.wikipedia.org/wiki/Flexure

From https://openflexure.org/projects/microscope/

> Optomechanics is a crucial part of any microscope; when working at high magnification, it is absolutely crucial to keep the sample steady and to be able to bring it into focus precisely. Accurate motion control is extremely difficult using printed mechanical parts, as good linear motion typically requires tight tolerances and a smooth surface finish.

> This design for a 3D printed microscope stage uses plastic flexures, meaning its motion is free from friction and vibration. It achieves steps well below 100 nanometers when driven with miniature stepper motors, and is stable to within a few microns over several days.

Re:Print your own laboratory-grade microscope for US$18 by jtc9242 on Saturday May 09, 2020 @05:55AM (#23123410)
Hey, paper author here. You can build a simple microscope like that. However, for many applications, including the Malaria diagnosis work we discuss in the paper, you need to be able to do high-magnification scans of huge sample regions. This needs automated movement and autofocus to work nicely. The unique part of our design is the low cost, ~50 nanometer precision automated sample positioning. As far as I'm aware, no other low-cost open-source design provides that kind of mechanical positioning system.
Re:Print your own laboratory-grade microscope for US$18 by kitd on Monday May 04, 2020 @12:28PM (#23069998)
One of the benefits of the design being open-source, according to the linked site, is that it can be adapted locally to meet end users requirements, in this case labs in Tanzania and Kenya.

That would be more difficult with pre-manufactured parts.