News for hackers. Stuff that matters.
Re:Solar Storm of 1859 by spdustin on Monday May 04, 2020 @09:14AM (#23067619)
That isn’t actually true. Induced current will occur in nearly any conductor, and the biggest risk all over the world is in the loss of high voltage transformers.

This is absolutely, 100% a big problem. While these FOIA’d FEMA docs [0] are just one source, searching for “solar flare blackout” will net you all the sources you need. It’s the same as a nuclear EMP.

[0] (PDF): http://www.governmentattic.org/24docs/UnpubFEMAgeomagRpts_20...

Re:Solar Storm of 1859 by Jeema101 on Monday May 04, 2020 @09:43AM (#23067933)
The North American Electric Reliability Corporation apparently doesn't agree with that assessment:

"NERC recognizes that other studies have indicated a severe GMD event would result in the failure of a large number of EHV transformers. The work of the GMD Task Force documented in this report does not support this result for reasons detailed in Chapter 5 (Power Transformers), and Chapter 8 (Power System Analysis). Instead, voltage instability is the far more likely result of a severe GMD storm, although older transformers of a certain design and transformers near the end of operation life could experience damage."

https://web.archive.org/web/20150908075507/https://www.frcc....

Re:Solar Storm of 1859 by spdustin on Monday May 04, 2020 @03:07PM (#23071996)
Read this transcript [0] of remarks—given to the Federal Energy Regulatory Commission—at a 2016 hearing on US power transmission reliability. These remarks directly contradict the relevance and, indeed, the reliability of the NERC study quoted.

[0] (pdf): https://www.resilientsocieties.org/uploads/5/4/0/0/54008795/...

Re:Solar Storm of 1859 by SuoDuanDao on Monday May 04, 2020 @12:08PM (#23069711)
Well, I wasn't worried till I saw that. It reminds me of Trump saying there was no reason to worry about Coronavirus.
Re:Solar Storm of 1859 by throwaway_pdp09 on Monday May 04, 2020 @09:23AM (#23067724)
The stuff about blowing the transformers is exactly what I've heard too. If there are any EE who'd care to comment, I'd be curious to know if the level of power that starts flowing through HV cables could damage or destroy them. As I've not heard this I assume not (one bit of good news) but I'd like to know.
Re:Solar Storm of 1859 by geomagthrowaway on Monday May 04, 2020 @06:33PM (#23074159)
The problem is not directly with the wires, its the addition of the quasi-DC induced currents in an AC transformer. Even the addition of a small DC current can lead to unwanted harmonics or in extreme cases spot heating (this is what you think of when people say 'knocking out a transformer').

If you want a very in-depth review: https://doi.org/10.1002/2016SW001501

Re:Solar Storm of 1859 by throwaway_pdp09 on Tuesday May 05, 2020 @03:57AM (#23077587)
Well over my head but printed it out and will read anyway. Thank you.
Re:Solar Storm of 1859 by Retric on Monday May 04, 2020 @09:39AM (#23067892)
Electrical cables are untwisted, but they are also designed to handle a lot of current so the overwhelming majority would be fine. Unfortunately, ultra long distance power transmission cables are the exception.

The long term damage from that is significantly less than assumed. Yes, making ultra efficient transformers designed to last decades is extremely time consuming, but building something less efficient in under a week is also possible. There would likely be various electrical issues until they where replaced, but that’s vastly better than societal collapse.

Re:Solar Storm of 1859 by spdustin on Monday May 04, 2020 @02:43PM (#23071716)
I do not believe the international supply chain is sufficient to replace any at-risk high-voltage transformers that are destroyed by an electromagnetic pulse. There is a considerable body of research around this topic.
Re:Solar Storm of 1859 by Retric on Monday May 04, 2020 @02:49PM (#23071791)
This is not a question of 1:1 replacement via the existing supply chain. This is using a 1920’s solution that gets us 80% of normal not the much better but more difficult 2020’s solution to the same problems.

Consider, a modern ship’s propeller is an marvel of modern engineering that would be extremely difficult to replace with something nearly as good. But, welding some plates to the drive shaft is vastly better than nothing in an emergency. Similarly, if the choice is a poor solution or no electrical grid, having some power makes a huge difference.

Re:Solar Storm of 1859 by LargoLasskhyfv on Monday May 04, 2020 @11:41PM (#23076253)
Look at this: https://en.wikipedia.org/wiki/Electrical_grid#/media/File:A_...

The purple lines there stand for the highest voltage level of the grid which usually runs at 380.000 to 400.000 Volts(with a few higher exceptions). These and their transformers are the most vulnerable to what we are talking about.

What do you hope to 'McGuyvering' there with maybe 110.000 Volts when the whole structure and anything connected to that is designed, specified, and built for at least three times the voltage?

Re:Solar Storm of 1859 by Retric on Tuesday May 05, 2020 @07:13AM (#23078739)
This is what we are concerned with: https://en.wikipedia.org/wiki/Electrical_grid#/media/File:Un... Not all of those lines are equally at risk, but for the sake of argument assume everything over 200KV is gone.

400kV is not directly stepped down to 33kV there are generally intermediaries at 132kV and or 66kV. So if you can send 132kV or even 66kV much of the equipment can be used.

Getting enough power to operate refrigeration and stop lights is a big deal. If you can only send 20% of normal power across those lines then that’s what you’re stuck with. In places such as Hawaii, local generation is close enough that your it’s no big deal, in others you may end up with rolling blackouts or charging 1+$/kWh.

Re:Solar Storm of 1859 by lowwave on Monday May 04, 2020 @11:02AM (#23068857)
Seems like the trillions bailout money ought to be spent on hardening these systems to prevent a solar flares or EMP type of events.