News for hackers. Stuff that matters.
Re:Repository for Open Source Mouse Firmware and Hardware by Futurologist on Friday May 01, 2020 @12:13PM (#23043562)
I'm the hacker behind the Open Source Mouse Repo.

I still have some ADNS2620 sensors in my stash (yes, that was a typo that is now fixed). Look into the readme and see that there is a company called PixArt that seems to be the only source for some of these parts. I did get a bite (mouse bite?) from their rep at the time of the OSHWA Summit 2 years ago, but they went crickets. This project could get resurrected if there is a replacement sensor chip. I kind of like the Arduino Leonardo + ADNS sensor, and not interested in just a breakout of an 'all in one' mouse sensor.

If yer interested in getting a full kit or an ADNS sensor, please comment on the github issue tab https://github.com/biomurph/Mouse/issues/7

Re:Repository for Open Source Mouse Firmware and Hardware by milton35 on Friday May 01, 2020 @12:33PM (#23043786)
It's not just "a company". Avago sold the IP to Pixart (after a long protracted patent battle) and exited the sensor market.

Now all old Avago models are manufactured by Pixart.

Re:Repository for Open Source Mouse Firmware and Hardware by zargon on Friday May 01, 2020 @01:47PM (#23044635)
Avago's datasheets were thorough and easy to understand. Pixart datasheets, if you can find one, are incomplete and full of grammatical non-sequiturs and ambiguities. I really miss Avago.
Re:Repository for Open Source Mouse Firmware and Hardware by swimfar on Friday May 01, 2020 @01:01PM (#23044117)
Here's another really cool DIY mouse project:

https://hackaday.io/project/171196-rx-modulus-completely-mod...

Re:Repository for Open Source Mouse Firmware and Hardware by leovander on Friday May 01, 2020 @01:29PM (#23044429)
You can order a ploopy[0] kit or modify their source[1]. I think a few users on r/trackballs[2] might have gotten QMK to work with it.

[0] https://www.ploopy.co/

[1] https://github.com/ploopyco/mouse

[2] https://www.reddit.com/r/Trackballs/comments/dk4ha7/ploopy_v...

Re:Repository for Open Source Mouse Firmware and Hardware by microcolonel on Friday May 01, 2020 @02:33PM (#23045103)
I've been wanting to try retrofitting new guts for my Kensington SlimBlade trackball, particularly making it poll and process at 1000Hz rather than 125, since now all of my monitors refresh faster than it does. I've switched to a Logitech G Pro primarily because of the marked difference in responsiveness.

The one thing that might be difficult is doing the scroll detection, since the SlimBlade produces scroll events when you rotate the ball about the vertical axis. Maybe I could get one of those kendryte thingies to do realtime inferencing on a model to discriminate scrolling from pointing.

Re:Repository for Open Source Mouse Firmware and Hardware by fireattack on Friday May 01, 2020 @10:57AM (#23042578)
Searching "ADNS2026" results in this page and this page only. His link to SparkFun is "ADNS2620". Typo?

Also, his photo reads "ADNS2016"..

Re:Repository for Open Source Mouse Firmware and Hardware by roland35 on Friday May 01, 2020 @11:35AM (#23043083)
ADNS-2620 does seem to be an obsolete part on digikey: https://www.digikey.com/product-detail/en/broadcom-limited/A...
Re:Repository for Open Source Mouse Firmware and Hardware by millette on Friday May 01, 2020 @11:18AM (#23042841)
Re:Repository for Open Source Mouse Firmware and Hardware by SparkyMcUnicorn on Friday May 01, 2020 @11:02AM (#23042633)
Even though it's mostly frivolous for a mouse...

I've gotten myself into the QMK world, and was recently thinking about the possibility of something like this.

My thought was to start with a atmega32 or something. Might venture down that path when I get a free weekend or two now that I have access to a 3d printer.

Re:Repository for Open Source Mouse Firmware and Hardware by leovander on Friday May 01, 2020 @01:32PM (#23044466)
See my separate comment about QMK and the ploopy.
Re:Repository for Open Source Mouse Firmware and Hardware by RedBeetDeadpool on Friday May 01, 2020 @10:55AM (#23042560)
Sweet! now I can finally make my vertical mouse + numpad + modifiers + thumb scrollwheel + lasers.
Re:Repository for Open Source Mouse Firmware and Hardware by fit2rule on Friday May 01, 2020 @12:27PM (#23043737)
Seems like the logical next step is that we'll see a lot of slickly machined cases...
Re:Repository for Open Source Mouse Firmware and Hardware by leovander on Friday May 01, 2020 @01:34PM (#23044488)
Most likely 3d printed.