News for hackers. Stuff that matters.
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by slhlk3h5klh on Tuesday April 28, 2020 @08:18PM (#23013781)
I've upgraded that particular model. You can use something like this to replace the internal disk: https://www.ebay.com/itm/123514199917

Removing the screen cover is easy - all you need is a couple suction cups: https://www.ebay.com/itm/323959879241

Re:Lessons Learned from Dealing with an iMac’s Dead SSD by drewg123 on Tuesday April 28, 2020 @08:20PM (#23013804)
I'm not going to try to remove the screen, I'm sorry.

I don't mind turning screws, but I'm not going to mess with glass and glue and stuff. I'm clumsy and afraid I'll break something just by looking at it wrong. Especially on something that isn't mine.

Re:Lessons Learned from Dealing with an iMac’s Dead SSD by slhlk3h5klh on Wednesday April 29, 2020 @12:05AM (#23015230)
There's no glue - it's held on by magnets. Honestly, it's really easy! Just check here: https://youtu.be/pU2JT6NGNOQ?t=11
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by _ph_ on Wednesday April 29, 2020 @02:23AM (#23016028)
With newer models, Apple has replaced the magnets with glue.
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by lonelappde on Tuesday April 28, 2020 @08:41PM (#23013948)
Screws are much more delicate than glass. Screws strip very easily, making it impossible to remove the connection.
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by throwanem on Tuesday April 28, 2020 @11:54PM (#23015161)
Philips heads strip unusually easily because the driver will fit, but then cam out damaging the drive, if you use the wrong driver size or too little pressure. Or if it's actually a JIS or Pozidriv, and you're using a Philips driver because you don't know better, or the proper sets are expensive, or the size and type you need is in the same place all your 10mm sockets are.

Most other drives don't have most of these problems. Even with the infamous Pentalobe, as long as you get the size right, it's pretty hard to screw up.

Re:Lessons Learned from Dealing with an iMac’s Dead SSD by saagarjha on Wednesday April 29, 2020 @12:36AM (#23015418)
Philips heads camming out is a feature in certain contexts, apparently.
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by throwanem on Wednesday April 29, 2020 @12:47AM (#23015480)
So I gather, and after all it is by design, but after a lifetime of dealing with the miserable things I've come to regard the design as either obsolete or just bad from the start.

edit: Apocryphally by design, anyway. Wikipedia says that's an urban legend, unfounded. I cordially despise the things either way, and I'm sure the sentiment is reciprocated.

Re:Lessons Learned from Dealing with an iMac’s Dead SSD by imtringued on Wednesday April 29, 2020 @06:53AM (#23017713)
They are bad by design. You can just limit the torque on your cordless drill.
Re:Lessons Learned from Dealing with an iMac’s Dead SSD by djrogers on Tuesday April 28, 2020 @11:50PM (#23015119)
It’s not glue - the glass is actually held on by magnets around the perimeter. At least my iMac was...