The varying current through the tungsten will result in a varying power consumption (varying at a 60hz rate). The varying power consumption will result in a small amount of varying temperature on the filament.
Now, the filament does not cool down instantly, so the result is its temperature will vary by a few degrees, but likely not enough to ever be perceptible to human eyes. But with a sensitive enough (and fast reacting enough) temperature probe, one could likely measure the temperature rise/fall of the filament that is synchronized with the line frequency.
I'm not sure you've shown that this would be visible to a housefly as a "slow pulse from light to dark," as the post I was replying to claimed. First of all, you said the power consumption will vary at a 60hz rate, but it seems to me it will vary at a 120hz rate, since the current will be at its max magnitude twice per cycle (as you say in the first paragraph). But more to the point, I don't know whether the temperature/lumens will decrease enough in 1/120th of a second to be visible to houseflies or anything else.
Trying to research the answer, I found this physics lab worksheet [1] from Pasco (the makers of sensors), for a high school lab measuring the output frequency of incandescent bulbs vs fluorescent bulbs, but without doing the lab I don't know the results.
The numbers here show a >25% difference for an example bulb.
Also, even ignoring how the cooling starts off at its fastest, with radiation scaled to the fourth power of temperature... incandescent lights switch off in about a tenth of a second. Even if that was completely linear, it would be very visible. Even a 1% flicker would be visible.
This sounds amazing to me, but also confusing. My understanding is that an incandescent bulb works entirely by heating up the filament. There should be no way that the filament is cooling down and heating up in anywhere close to the rate that it would require to get some kind of wagon-wheel effect, which is what it sounds like you're describing.