News for hackers. Stuff that matters.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by Tepix on Sunday January 26, 2020 @02:40PM (#22154218)
Is there a clever way of hooking SSDs to the SCSI ports of these old computers?
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by angry_octet on Sunday January 26, 2020 @07:13PM (#22155828)
Already done: https://www.redrocktech.com/products/scsi-drives

There are also Fibre Channel adapters for these if you have the XIO-PCI card cage. Can boot from it with some special magic IIRC, but a local SCSI drive is fine for most things.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by aperrien on Sunday January 26, 2020 @10:07PM (#22156594)
How much are the adapters? I don't really see prices on that site.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by angry_octet on Sunday January 26, 2020 @10:26PM (#22156660)
Sorry the FC adapters are original SGI gear, you would have to hunt for it.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by wazoox on Monday January 27, 2020 @08:39AM (#22159067)
Actually IRIX works with old Adaptec PCI FC cards, but to get it running you need to recompile the kernel with some arcane, undocumented parameters. Back then when I was a regular of comp.sys.sgi.* newsgroups, Alexis Cousein gave me the trick and saved my day when my official SGI card died.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by angry_octet on Tuesday January 28, 2020 @11:01PM (#22177273)
Now that's a name I haven't heard in a long time...

It might have actually been Adaptec PCI in an SGI XIO-PCI card cage, memory is failing me. Definitely some dark magic required on Irix and on the FC switch and storage target side.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by wazoox on Wednesday January 29, 2020 @06:12AM (#22179345)
Yes, that's right. I had an XIO FC board in my O2000 that died, and I had spare Adaptec FC PCI cards for PCs. I had previously noticed that the SGI PCI FC cards for O2s or O200s were actually the same as the Adaptec, physically, but with an SGI ROM.

So after my XIO FC board died, I added an Adaptec board to my O2K to get my RAID array back online (the whole company was out of work because of that failure).

However though the card appeared in "hinv", it didn't work... After I asked for help on the newsgroups (the system was out of maintenance...) Alexis sent me a private email with the necessary invocation of the kernel rebuild command, and it worked like a charm from there.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by aperrien on Sunday January 26, 2020 @04:39PM (#22154983)
I'm planning to use a SCSI2SD adapter for my old IRIS stations:

https://store.inertialcomputing.com/product-p/scsi2sd-v5-st3...

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by jibanes on Sunday January 26, 2020 @02:51PM (#22154298)
Instead, you should netboot them, and run nfsroot; works with irix so I suspect it will work with linux; dhcpd will inform of the tftp location of the kernel and pass the right parameters, should be doable and faster, more reliable. Now what I wonder is if X11/Xorg supports any of these framebuffers.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by newnewpdro on Sunday January 26, 2020 @04:01PM (#22154758)
It's not like nfs has parity with a local posix-compliant filesystem. O_APPEND for example is inherently racy and emulated on nfs last I checked.

But sure, if you're just tooling around, nfsroot is convenient.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by Zenst on Sunday January 26, 2020 @04:18PM (#22154862)
I've seen SCSI adapters of many types - SD card ones as well, don't have any direct product I could link, google pulled up many avenues - including this: https://www.crucial.com/usa/en/upgrades/sgi-%28silicon-graph... though didn't see SGI on list, so hard to rabbit hole that one without using live chat perhaps and may well be a legacy placeholder that time forgot.

Though network booting and storage may well be an easier avenue and cheaper. If you already have a NAS, that may well be the easiest path.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by hapless on Sunday January 26, 2020 @04:32PM (#22154948)
The on-board NIC in an octane is 10/100, so network anything will be painful.

It's possible to install gigE, but you will need a PCI-X shoebox and also a NIC with compatible firmware. Not super easy to find.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by rbranson on Sunday January 26, 2020 @05:35PM (#22155314)
How so? I’ve never seen a gigE port that didn’t also support 10/100.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by hapless on Sunday January 26, 2020 @06:32PM (#22155630)
I mean, 11 mb/s is hilariously slow. Much, much slower than the native SCSI drives

You will want gigE if you are going to do anything interesting over the network on an Octane.

Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by ddingus on Monday January 27, 2020 @02:53AM (#22157583)
Especially given great 15kRPM SCSI drives could peak over 200Mb/sec
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by MisterTea on Sunday January 26, 2020 @04:31PM (#22154942)
The Octane had a PCI card cage option so it's possible you could add a pci sata card.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by hapless on Sunday January 26, 2020 @06:46PM (#22155707)
You can’t boot off of it.
Re:Linux 5.5 to Offer Mainline Support for SGI's Octane MIPS... by core-questions on Sunday January 26, 2020 @08:15PM (#22156103)
Sticking /boot on a normal old SCSI disk and then putting everything else on a SATA SSD would be compelling.