News for hackers. Stuff that matters.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by RodgerTheGreat on Tuesday December 31, 2019 @09:57AM (#21921349)
Facebook has to be the least convenient way this could be hosted. Here's a mirror: https://pastebin.com/raw/Yq5khyQL
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by reaperducer on Tuesday December 31, 2019 @12:23PM (#21922677)
Facebook has to be the least convenient way this could be hosted

Compared to the rest of the internet, yes. But for the Model 100 people, this is actually the cream of the crop.

Sadly, information in the Model 100 community is notoriously difficult to get to. Well, not fully "difficult." More like "obnoxious."

Most of the good stuff is on old web sites with many broken links, little documentation, and abysmal navigation. I think the main repository is actually the web site of a guy who died years ago and is kept online, but unmaintained and suffering from severe bitrot, by people about to go the same way.

For interactive discussion, the primary source is a mailing list where people ask the same questions over and over and nobody trims their replies, so you might get a message reply that just says "yep" followed by 150 lines of nested quotes. In digest form, it's simply unusable.

So, amazingly, a Facebook post is a thoroughly modern and convenient way for Model 100 enthusiasts to pass information around, compared to all of the other methods they employ.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by zozbot234 on Tuesday December 31, 2019 @12:27PM (#21922710)
> Most of the good stuff is on old web sites with many broken links, little documentation, and abysmal navigation. I think the main repository is actually the web site of a guy who died years ago and is kept online, but unmaintained and suffering from severe bitrot, by people about to go the same way.

As long as the site(s) have been grabbed by Internet Archive, I'm not sure that this has to be an issue. (I've noticed that the archive.org 'Wayback machine' will even archive some downloads, albeit it's not something that should be counted on.)

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by reaperducer on Tuesday December 31, 2019 @12:51PM (#21922909)
I'm not sure that this has to be an issue

It doesn't "have to," but sadly it is. The internet, like the rest of the world, is not a perfect place. If IA doesn't find a web site before the bitrot sets in, then what? There are huge swaths of the web that are not in IA, and from what I read on HN, IA doesn't have the capacity to archive.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by kjs3 on Tuesday December 31, 2019 @12:58PM (#21922971)
I don't want to speak ill of them because they're doing an amazing job, but the Internet Archive doesn't have everything (especially old, long gone and/or obscure sites), isn't always complete, and often doesn't have things that back in the day that were on FTP sites. Sometimes you get lucky, but I've not had great luck there.

If you're maintaining some repository of information others find useful, please-please-please have a plan to pass it on to a successor caretaker and a notation in your will about your wishes.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by zozbot234 on Tuesday December 31, 2019 @01:08PM (#21923039)
I'm well aware of that, sadly. But often, part of "maintaining" a valuable repository of information (especially one that has reached stability and is not seeing ongoing updates) is uploading it to the Archive yourself. The Internet Archive has "trouble" dealing with information in the gigabytes and terabytes (which is why donations to them are valuable) but retrocomputing stuff is not like that.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by reaperducer on Tuesday December 31, 2019 @01:41PM (#21923297)
part of "maintaining" a valuable repository of information... is uploading it to the Archive yourself

The problem is that we're talking about information that started suffering from bitrot before the Internet Archive became a big thing. Or even before the Internet Archive existed. Heck 99.999% of it existed before the internet.

Sure, it would have been great if on May 13, 1996 someone would have uploaded all of the information that there has ever been about the TRS-80 Model 100 to IA, but that didn't happen.

So often in places like HN the answer to flaws is "Well, you should have...," as if that solves the problem, or makes it go away. But it doesn't. It just makes the person writing that look like a jerk who isn't interested in solving problems, but in pointing out the failings of others.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by firethief on Tuesday December 31, 2019 @12:48PM (#21922886)
Facebook posts are the persimmons of bitrot...
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by macjohnmcc on Tuesday December 31, 2019 @10:14AM (#21921473)
Printed in the magazine and having to type it in was significantly less convenient than Facebook.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by Zenst on Tuesday December 31, 2019 @10:53AM (#21921829)
Depends upon perspective.

Can walk into shop and purchase magazine and the magazine owner wouldn't know what you read, when you read it.... Equally the outlay would be just for the magazine compared to internet connection, computer capable of browsing the internet and then still have to transfer it to the TRS-80/100.

Then there was the important aspect many miss-out upon today, when you typed something in from a magazine, you got to know the code over just running a program. You made mistakes, and often the magazines would have erata sections to cover typo's from the last edition and with those mistakes - you learned even more than just hitting run.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by macjohnmcc on Tuesday December 31, 2019 @11:18AM (#21922083)
Yeah I'm not supporting Facebook just stating that the physical act of typing it all in vs copying from a Facebook post is not as easy. I have no Facebook account. I typed many programs in from Compute and other magazines back in the day. I miss Byte magazine most of all. I may even try to this this on my Model 100 at some point. Just for kicks.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by Zenst on Tuesday December 31, 2019 @11:28AM (#21922185)
The TRS-80 model 100 has a RS232, so a null-modem cable should be the only hardware needed to transfer.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by reaperducer on Tuesday December 31, 2019 @12:16PM (#21922615)
And for convenience, a terminal program. It makes debugging the connection to the Model 100 a lot easier. I use Serial on macOS. I don't remember what it costs, but it couldn't have been much.

The Model 100 supports RS232 connections up to (IIRC) 115k baud, but mine gets flaky at that speed, so I keep it at 9600. That's more than fast enough for the tiny files the 100 uses. It's the next door neighbor to instant.

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by reaperducer on Tuesday December 31, 2019 @01:44PM (#21923334)
Printed in the magazine and having to type it in was significantly less convenient than Facebook.

But, apparently, infinitely more resilient!

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by dukoid on Tuesday December 31, 2019 @10:15AM (#21921476)
Looks more or less like "standard" MS-Basic... Shouldn't be too hard to get it running with vintage-basic.net ?
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by daveloyall on Tuesday December 31, 2019 @12:56PM (#21922950)
> `PRINT#-1`

... on line 4500 looks to be some kind of idiom.. I don't see a corresponding `OPEN` statement?

Re:Lisp Interpreter in Tandy TRS-80/100 Basic by dukoid on Wednesday January 01, 2020 @01:39PM (#21929638)
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by spc476 on Tuesday December 31, 2019 @05:38PM (#21925256)
That might send output to the printer. I know on the TRS-80 Color Computer, the printer was #-2.
Re:Lisp Interpreter in Tandy TRS-80/100 Basic by ficklepickle on Tuesday December 31, 2019 @06:30PM (#21925544)
I have one of these, with printer. I should really dig it out one of these days. It's from before my time but something about cassettes and thermal printers piques my interest.