News for hackers. Stuff that matters.
Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by userbinator on Tuesday December 17, 2019 @04:24PM (#21819006)
my friend had his iPhone upgraded from 16GB to 128GB storage (a student literally desoldered the flash with a hot air gun, transferred it over in a BGA reader and soldered a new chip on, in under an hour)

One huge difference I've noticed between HQB (and other smaller electronics markets I've been to elsewhere in China) and whatever repair shops still exist in the West is how much more interactive the whole experience is. I once went to HQB with a friend who wanted to get his laptop fixed, and the serviceperson (who also happened to be female --- another thing first-time visitors may be surprised by is the nearly 50/50 gender ratio) would take it apart and diagnose while talking to us, showing exactly what the problem was. They had run out of the part that needed replacement, but instead of telling us to come back later, she left her stall and lead us to another store in the same building to buy a reel of it, then went back and replaced it, showed us that it now worked, and asked a very reasonable price. The shop had several stalls of others doing the same thing, and a pretty long line of people waiting too.

It's a huge contrast to more "Western" repair experiences, where you're lucky to have it done on the same day, much less get to see the process or be told what the problem was.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by seanmcdirmid on Tuesday December 17, 2019 @06:09PM (#21819980)
They do this because repair fraud is still a huge problem in China. If they take your laptop or iPhone into a back room to repair it, 9 times out of 10 they are going to swap out other components with faulty ones (hence getting more repair business down the line along with a non faulty component to use later). I’ve been caught by that scam once in Beijing when I needed my baseband replaced, they swapped out the entire internals and it broke again a week later.

Everyone in the know insists on being there for the repairs to make sure no shenanigans occur. So the reputable places do it in front of you and explain what they are doing so you don’t feel cheated later if something else breaks.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by supportlocal4h on Friday December 20, 2019 @09:54AM (#21844564)
And the more clever crooks make up some excuse like being out of stock on some part then lead you away while a partner does the swapping.
Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by wst_ on Tuesday December 17, 2019 @05:34PM (#21819678)
I've got very similar experience in Akihabara, Tokyo.

Trivial thing happened to my headphones. The wire broke very close to the jack plug because of the frequent bending. There was a young guy there, I told him what happened using my broken Japanese, he patiently listened, took the headphones, made some basic check on them, took my phone number and told me to come in 30 minutes. In 20 minutes I got call that it's done. When it came to payment he asked me how much, I think, I should pay. I've been oblivious so he proposed 500 JPY, which is close to nothing, considering that I've had no tools and spare parts.

London, UK - the same situation happened. I've been told to throw it away.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by NeedMoreTea on Wednesday December 18, 2019 @03:25AM (#21822920)
UK spent over 50 years looking down on "doing" trades, the engineers, technicians, repairers etc, and been brainwashed that converting to a service economy is better for all. Industry and manufacturing was closed as a matter of policy, even in sectors we still competed well.

UK has destroyed the supply chains, the experience, or the ability to train or employ such people any more except in very exceptional cases. End result is few have even seen a jack plug or mains plug that's not moulded or would know where to start.

So we have shops that have no idea how to fix a broken plug or cable, and jewellers that have to return a watch to the manufacturer for a battery change. I'd guess in 1980-1990 most shops on Tottenham Court Road could have soldered a new one, along with most similar shops around the country now they're all just box shifters.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by Fradow on Thursday December 19, 2019 @08:34AM (#21834720)
This is not specific to UK, I'd hazard that the whole western world is like that.

You litteraly cannot find ANY electronics shop in Paris (there were still a few ones a few years ago), and no one apart from some non-profits initiative is willing to even open a piece of electronics to do some simple repairs that involve soldering (the only repair being done is changing a part on phones/tablets/computers).

It's really depressing, because a lot repairs are really simple (unsolder a capacitor that is visibly broken, solder a new one in, or even replace a fuse in audio equipment) and instead those objects are trashed, contributing to the growing ecological problems.

That state of affair comes from both an economic lens (manpower is too costly compared to buying a new one), and a skill shortage (people watch me like an alien when I do those simple repairs)

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by BrandoElFollito on Sunday December 22, 2019 @11:33AM (#21858070)
If you are in Versailles there is Vart Électronique. I once needed a cable or something and thought I would need to order it on AliExpress.

I gave them a call and 15 min of biking later I had what I needed for a few euros.

The shop is an inscriptible mess but the guys running it are ok.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by tecleandor on Thursday December 19, 2019 @07:27AM (#21834274)
Do you remember where did you go for fixing your headphones?
Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by wst_ on Wednesday January 01, 2020 @05:49PM (#21931291)
Sorry for late reply, I was away on holidays. It's Bromley East St. Small PC/laptop repair shop. I couldn't find any general electronic/electric repair shop. They told me that cables are too thin and the thing is not worth the work in general. As a result I've got a soldering iron and working headphones at home - fixed it myself.
Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by glandium on Tuesday December 17, 2019 @07:45PM (#21820710)
If it was for the same headphones, maybe you should throw them away if that keeps reoccurring.
Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by Scoundreller on Tuesday December 17, 2019 @04:47PM (#21819273)
And the Western approach is to replace the board that’s faulty rather than the part or two that causes 99% of the failures of that board.

We could only pray that the western repair shop sends the board somewhere for refurbishment.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by WrtCdEvrydy on Tuesday December 17, 2019 @05:53PM (#21819848)
It's a labor cost.

As hardware becomes more all-in-one, your cost of labor for knowledge of desoldering a single piece becomes more and more.

Noone wants 'repaired goods' in the US.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by Scoundreller on Tuesday December 17, 2019 @06:38PM (#21820258)
Sort of. I feel like it’s a technical education thing.

The fellow in Shenzhen is probably getting paid hundreds of dollars per month. (Just a guess, I know SZ is expensive, but has lots of labour coming from outer lying areas).

Even if it cost 10x labour for the procedure of turning a 16gb iPhone into a 128gb, it would be worth it.

But I don’t think you could train the average Western worker to become a BGA solder worker and reflasher and have them work for you for more than 6 months before racing to a higher paying job.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by penagwin on Tuesday December 17, 2019 @11:50PM (#21821899)
This. I worked at a small cell phone repair store. We could replace lots of parts in say an iPhone 7, but nearly no soldering. Parts are relatively cheap (lcd might be 35$ for the 7 when I was there) - and we were only paid up to 12/14$ an hour (that's nearing McDonald's level).

There is little proper education for something like BGA soldering, and if there is then you're more likely to get a job as an engineer.

Re:The Essential Guide to Electronics in Shenzhen (2016) [pdf] by ClumsyPilot on Wednesday December 18, 2019 @02:00AM (#21822542)
That's tragic, ignorance costs a lot more than education in the long run