Unibody construction means it’ll be a write off if the bed is damaged. Compare this with other trucks where the bed is bolted on, allowing for functional modifications to the truck: flat beds, boxes, or even just towing certain types of trailers. And if you damage the bed on those types of trucks, you can replace it for a relatively low cost.

Sure, if you’re just throwing a tool box in the back then you’re fine. Then again you didn’t need a truck to begin with.

First of all, a unibody construction doesn't mean that the complete bed is part of the body, there could be parts on top of a foundation which can be easily removed. Also, steel means, it better repairable than any other car material. You can reasonably easy cut out parts and weld in new sheets. That most of the surfaces of the truck are flat makes this even easier.

You must have missed the part about how the steel is stainless. And also welding is extremely labor intensive, and time consuming. The flat body panels actually make this harder, because you can't warp the panels or else it will be extremely obvious. And if there's no paint, there's no filling in dents with body filler, it requires absolute precision, and metalworking skills which haven't been around for years in the auto body collision industry. I can't tell if it actually has paint or not, but you should look up how a small dent is fixed in a Delorean.

> You can reasonably easy cut out parts and weld in new sheets.

That's only going to add to its dystopic future flair.

To me, that’s a feature not a bug

Every construction truck I have ever seen had an aftermarket bed liner installed.

Granted, that's not a lot of construction trucks. But quite a few.

1. How many work trucks have you seen with a toolbox in the bed - almost all of them? How would you access one in this thing without literally climbing into the box?

2. How do you carry a ladder, roof rack, or box on this thing?

3. Where do I tie down the countless odd-shaped items that a work truck carries?

4. How do I mount a deck for bigger equipment on this truck?

5. Is 250 top range enough for a work truck that does field service and likely hauls significant weight?

This thing is less truck than the original Honda Ridgeline and that's saying something. You'll see one at the mall before you see one in the field.

Sloped bed rails exclude work use requiring any conventional bed-mounted toolboxes.

That design element alone has turned this into primarily a fun/status vehicle IMHO.

yeah the sloped bed is going to be a big problem i think. loading things from the side, ladder racks, tool boxes, etc. lots of issues with that.

the bed cover looks awesome though, and I love the ramp from the tailgate. that's fantastic.