Re:An Open Source 4-Port High Power USB Hub
by chendragon on Sunday November 03, 2019 @01:17PM
(#21435540)
USB isolators (single port) can be bought cheaply on eBay but may be bandwidth limited. They use a small isolated DC-DC brick and a USB isolation chip, probably with internal isolation capacitors to get the signals across
Re:An Open Source 4-Port High Power USB Hub
by mindslight on Sunday November 03, 2019 @04:32PM
(#21436762)
I think the ADI ones are actually based on transformers.
Specifically they'll do "Full Speed" 12Mbit, but not "High Speed" 480Mbit. USB3 @ 5Gbit can also be isolated, as it uses separate send/receive pairs. But that doesn't mean you can use a hub and drop down to 480MBit - they're separate data paths.
If you need 480Mbit, the best solution is probably a Raspberry Pi or other SBC, to convert to ethernet.
Re:An Open Source 4-Port High Power USB Hub
by topspin on Sunday November 03, 2019 @09:14PM
(#21438427)
How does one optically isolate power and ground? You can do it electrically with a transformer, but I haven't heard that optical power transducers (or something) could fit on PCBs. Yet.
Oh wait; solar calculators. Ok, but those won't give you 15W per port in any sort of reasonable size device.
Re:An Open Source 4-Port High Power USB Hub
by exabrial on Monday November 04, 2019 @11:31AM
(#21443198)
DC-DC converters. A lot of stompboxes use these internally actually
When doing so, I instantly introduce ground loops. MIDI gets around this by having opto-isolation as part of the spec, but MIDI-over-USB of course negates this. I would love to have a USB hub that was opto-isolated for both power, data, and ground!