Part of the problem is the big contract manufacturers (like Foxconn) are impossible to compete with on precision/cost.
In a past life, we moved a product from German manufacturing to China, as the German tooling wasn't fine enough to hit our (admittedly insane) tolerances. Whether or not the China MFG lied, they signed the contract and produced the parts. Though, we had to spend a lot of resources on additional testing rigs to weed out the tolerance misses/assembly line faults/bad parts over and beyond what the MFG caught.
Not to mention that exporting stuff from China even 10 years ago was a lesson in geopolitics. Not for the faint of heart. We ended up having Hewlett-Packard (who we were a very large customer of, and white-label resellers for them) export our first thousand or so units in HP boxes. Like night and day.
The overall competitive advantage is hard to capture. Time, money, ethics, work ethic, efficiency. Having an entire country's incentives aligned with extracting a cut of almost all consumer electronics in the world is hard to challenge.
I wonder how the next 15 years will look now that the part seems to be over.
I have a tip from speaking to distributors that a large part of the precision story for those guys is that they essentially just buy lots of SCARA robots from the likes of Denso, Toshiba, Yamaha.
Cost .. unsure. Those guys are expensive and time consuming to talk to. They don't get out of bed for small quantities. I'd posit their real advantage is vertical integration and in-house engineering. Those guys can presumably turn out a mold, arbitrary quantity castings or injected parts, solve issues and be in production by Tuesday. Many other firms face 6-8 week wait times per mold iteration, and 2-3 month delays on equipment purchase (let alone production line integration). They also have government support as large employers, so face little issue with exports, land acquisition, etc.
RoHS is a good example, but China somehow turned it into a competitive advantage.
I've wondered what the effect would be if the dump could force manufacturers to buy back broken appliances that are still under mandatory warranty.
Now, buying "Made in Japan" seems plausible. Panasonic has long made laptops in Japan, for the Japanese market only. Check out the Let's Note series, like the CF-SV7, SV8 - you won't find them anywhere else. There seem to be a lot of products that are made in Japan for the internal market only.
I can 100% testify this as true. Big manufacturers do "binning" on the final products just like chip fabs do.
If you see SKUs difference for 1st world and 2nd world countries without any spec difference, it's nearly 100% a case of such binning.
For example Dell diverts laptops with bad displays to Eastern Europe and low income Asian countries (with exception of China, China always gets best bins along with US market because they are afraid of backlash.)
In one Bangladeshi retail chain, every Dell device I saw had a dead pixel, or dust under bond layer. They were almost certainly specifically picking rejects.
Why so? MBA logic.
You definitely can not get so much bad panels if buy pretested panels (which is now standard.) They are picked 100% deliberately.
Defective panels are sold at great discounts, even for 4k and alike panels. So that makes a great temptation. You can near instantly get ~80usd off in case of a 4k panel out of a unit with $400 BOM.
This is why I'm afraid buying just any "premium" good in 3rd world countries. Cheaper devices are a bit safer in that regard as there is not as much incentive to do this with cheaper parts.
Ironically, low-end and mid-tier parts are often having superior reliability and defect rate exactly because there is no margin selling bad QC parts.
Voltage regulator was literally the same part. Ford specified statistical process control and sampling inspection was good enough. Cessna demanded that every voltage regulator be tested.
Solution: run the line, test the percentage of parts Ford demanded, stamp the additionally inspected parts with an additional Cessna part number. At the end of the line, if more parts were tested than Cessna needed, so what? Put 'em in a Ford box and ship 'em.
Cessna and Ford each got what they needed, far more cheaply than they could have individually.
And you are often getting a worse bin or even completely different product under the same name for that! This is 100% true, and the big co will continue doing that for as long as they they think they can get away with that.
Samsung is notorious for that. Some of their devices with the same name can have up to 4 different sets of internals for sale in different countries.
I am too. My distant acquaintance does business with a large retailer in the UK where they would buy returned products off the retailer at a much cheaper price (e.g. defects) and resell them in the Baltics.
Similarly, with a standard model on a same-day replacement plan, imperfections are likely to come back, with an added site visit cost. But the barrier to returning a customized model is higher. Creating another incentive for binning.
Part of the problem is: how do identify it, if even premium brands don't reliably maintain their standards?