Capacitors and flywheels make lousy bulk storage but are excellent for smoothing power demand and spinning reserve.
I suggest you try the experiment. Grab a 7805 and a 10kΩ resistor; you can find these in any discarded electronic device (from 1980 to 2005, anyway) or you can buy them at any electronics store. Connect the resistor between the “output” and “ground” pins of the 7805. Do not connect the “ground” pin to ground. Connect an LED between the “ground” pin (not the “output” pin) and actual ground. (The negative pin of the LED goes to ground.) Connect a positive DC voltage relative to ground to the “input” pin of the 7805; any voltage between 10 volts and 35 volts will work. Now you have a regulated 0.5 mA going through the LED; if you want to confirm this, replace the LED with a 1kΩ resistor and measure the voltage across it with your multimeter. Try different LEDs.
Do they emit “plenty of light”? No, they do not. None of them.
If you want variable current regulation, you can use a variable resistor, but you should probably put it in series with a fixed resistor. You aren’t going to burn up the 7805 without great effort, but you might burn up whatever you're driving with it.
One thing to note is that this probably isn't yet ready for home storage of solar power.
"Our iron battery has sufficient capabilities for practical use in low power devices and projects. The cell’s internal resistance is high, and so the discharge rate is limited."
At the moment it could be useful as a backup for high efficiency lighting. The bill of materials doesn't cover any electronics to monitor and maintain the cells as the charge/discharge.
But all pretty nifty!