News for hackers. Stuff that matters.
Re:Why did we wait so long for the bicycle? by dec0dedab0de on Monday July 15, 2019 @04:33PM (#20444941)
This is cool. Except it's driving me nuts that I can't figure out what's wrong with the first picture, or at least why it would immediately break.
Re:Why did we wait so long for the bicycle? by mayoff on Monday July 15, 2019 @04:45PM (#20445065)
It's missing the chainstays, which are the tubes from the bottom bracket (where the pedals attach) to the rear axle.

The seatstays (the tubes from under the seat to the rear axle) are only connected to the seat tube with a small weld. When you pedal, you're using the top part of the chain to pull the rear axle toward the pedals. This force is going to break the weld connecting the seatstays to the seat tube.

Note that a chain can't push, only pull, so the bottom part of the chain cannot counterbalance this force.

Re:Why did we wait so long for the bicycle? by bjackman on Tuesday July 16, 2019 @02:55AM (#20448025)
I think the fact that the crossbar is not connected directly to the headtube (part where the fork & handlebar assemblies pivot) would also cause a problem!
Re:Why did we wait so long for the bicycle? by dmurray on Monday July 15, 2019 @04:51PM (#20445147)
The back fork should be connected to the seatpost with a pair of horizontal braces.

It's an exaggeration to say it would immediately break. But if you put weight on it, it will tend to spread out (imagine putting weight on a bent piece of metal shaped like a ^). Still, the front fork isn't braced, and bikes exist with quite a large rake angle on the front fork (think a Harley-Davidson style chopper). So maybe you can make this design strong enough to bear a person's weight.

Re:Why did we wait so long for the bicycle? by dTal on Monday July 15, 2019 @05:15PM (#20445356)
As it's a single speed with no derailleur and the missing braces would be in tension, might not the chain itself fulfill the role?
Re:Why did we wait so long for the bicycle? by bsmith on Monday July 15, 2019 @06:28PM (#20445883)
It could, but undue tension on the chain vastly decreases the efficiency and longevity of the chain, and potentially, the cog/chainwheel. This would also present a safety issue because chains can (and do) break.
Re:Why did we wait so long for the bicycle? by gilbetron on Monday July 15, 2019 @05:24PM (#20445417)
Other people pointed out the chainstays are missing, although most people are missing out why they are important. Hint: the name tells it all!

Without them, the back "triangle" of the bike would flex, causing the distance where the chainstay would be to shorten, resulting in the chain popping off the gears, or at least causing it to skip a bunch. The chainstay causes the chain to ... stay.

Re:Why did we wait so long for the bicycle? by tbirrell on Monday July 15, 2019 @04:48PM (#20445106)
Its missing the bar from the pedals to the back tire. If you sat on this bike, all your weight would rest on the joint under the seat, bending the front half of the frame away from the back tire, at least sending the pedals into the ground, if not snapping the frame outright.
Re:Why did we wait so long for the bicycle? by my_username_is_ on Monday July 15, 2019 @04:43PM (#20445039)
It's missing the chain stays (a section of the frame linking the frame near the rear wheel to the pedal area). There would be a large cantilever arm trying to support a large part of the rider's weight, and it would likely break under the stress.
Re:Why did we wait so long for the bicycle? by phiiiillll on Monday July 15, 2019 @04:51PM (#20445142)
Picture the downward force generated by sitting on the bicycle causing the rear axle and bottom bracket to spread away from each other, causing the seatstays to break at the seat tube. This is what chainstays prevent on a complete frame.
Re:Why did we wait so long for the bicycle? by Johnny555 on Monday July 15, 2019 @05:06PM (#20445283)
Since there's no derailleur, the chain would do a good job of resisting that force (though since it's only on one side, maybe it wouldn't be enough, and the wheel/seat stays would twist)

Though when you start to pedal, the chain would tend to pull in and bend the seatstays, but there should be some level of force that is less than the opposite force caused by the rider's weight, so this bike could work under light pedal pressure.

Re:Why did we wait so long for the bicycle? by megablast on Monday July 15, 2019 @04:51PM (#20445143)
It is missing the part of the frame from the rear wheel to the bottom bracket.
Re:Why did we wait so long for the bicycle? by zild3d on Tuesday July 16, 2019 @01:42PM (#20452221)
in addition to what others mentioned, the chain attached to both wheels will make turning.. difficult