News for hackers. Stuff that matters.
Re:DD-WRT, I Know Where You Live by frou_dh on Tuesday December 28, 2010 @02:36AM (#2044932)
DD-WRT seemed decidedly "bloated" after I found out about Tomato. Maybe that is unfair or ignorant on my part, but do check out Tomato if you are considering DD-WRT.

http://www.polarcloud.com/tomato

Re:DD-WRT, I Know Where You Live by djacobs on Tuesday December 28, 2010 @10:40AM (#2045693)
Why are the only routers supported using 802.11G? I got one of the Buffalo 300N routers and was looking forward to trying this instead of DD-WRT.
Re:DD-WRT, I Know Where You Live by nuclear_eclipse on Tuesday December 28, 2010 @11:42AM (#2045878)
I assume it's because the developers of Tomato don't have any of the newer routers to attempt supporting them. There are a few other options for the G300NH, including OpenWRT, but I've just decided to stick with DD-WRT because it seems to have the best overall feature set.
Re:DD-WRT, I Know Where You Live by drivebyacct2 on Tuesday December 28, 2010 @03:11AM (#2044980)
Only if you're fortunate enough to have a supported device. :(
Re:DD-WRT, I Know Where You Live by bconway on Tuesday December 28, 2010 @11:54AM (#2045926)
Both OpenWRT and Tomato USB (http://tomatousb.org/) feature broader device support (via a 2.6 kernel). I prefer the latter.
Re:DD-WRT, I Know Where You Live by drivebyacct2 on Tuesday December 28, 2010 @05:04PM (#2047000)
Thanks for the link, sadly it appears that the later version of the WRT54G still aren't supported. :(
Re:DD-WRT, I Know Where You Live by Pent on Monday December 27, 2010 @10:50PM (#2044556)
So by visiting his blog we are essentially letting him use rebind on our connections? ;)
Re:DD-WRT, I Know Where You Live by jpcx01 on Tuesday December 28, 2010 @12:12AM (#2044716)
Some background here would be really nice (for us non device hackers). Who exactly would have DD-WRT on their routers? Is it something you have to install manually?

edit: i should have googled before asking :-). Apparently it's a custom firmware for linksys routers. Looks like you have to go through a lot of trouble to get it installed, so I'm sure the overall userbase is pretty small.

Re:DD-WRT, I Know Where You Live by JonnieCache on Tuesday December 28, 2010 @07:43AM (#2045317)
The best feature for me is the support for unusual wireless topographies. Our house is rented, so I can't go drilling holes in things to route ethernet cable. Instead I've built a wireless mesh network out of several DD-WRT routers, with the bonus of bridging this to the wired switch on each unit. This way the xbox and the kitchen computer can connect to the internet, which comes in upstairs, with no fuss. You can also do lots of fun point-to-point stuff. With a decent aerial and line of sight you can throw wifi for 2 miles or more using consumer routers.

http://www.dd-wrt.com/wiki/index.php/Linking_Routers

a close second is the SNMP server, allowing me to use this OSX dashboard widget to get a graph of incoming/outgoing bandwidth usage at the router:

http://www.apple.com/downloads/dashboard/networking_security...

If anyone is wondering which device is generally considered the best balance of price/spec for running these firmwares, its widely agreed to be the Buffalo WHR-HP-G54, which can be had for around £40/$60

EDIT: oh yeah and of course its also an openVPN server. Forgot about that. And if you get one with a USB port you can plug in a HDD and run rsync on it...

Re:DD-WRT, I Know Where You Live by reeses on Tuesday December 28, 2010 @12:53AM (#2044777)
There was enough demand that Linksys created models just for this purpose (the WRT54GL and friends).

It's an easy upgrade for a technical person. Download custom firmware, upload to router, reboot. The same people who would upgrade their own firmware from Linksys can install dd-wrt, Tomato, hyperwrt, etc. Admittedly, that's a small slice of the population but a large number of people.

Re:DD-WRT, I Know Where You Live by jimmyjim on Tuesday December 28, 2010 @01:30AM (#2044842)
For what purpose exactly would you want to put custom firmware on it? Why isn't the stock firmware good enough? I've a WRT54G router -- do I have any good reason to use any custom firmware?

I'm guessing it's just for hobbyists -- "just for the fun of it" kind of thing?

Re:DD-WRT, I Know Where You Live by cookiecaper on Tuesday December 28, 2010 @02:32AM (#2044930)
It provides a lot of additional functionality as the other comments have described, but it also fixes a lot of bugs and crappy handling of things. BitTorrent chokes hard with standard firmware (it doesn't handle many connections very gracefully), but I have no problems with Tomato. I also have lots of tuneability, DDNS on the router, graphs, QoS, access control, and many other very useful things.
Re:DD-WRT, I Know Where You Live by pyre on Tuesday December 28, 2010 @03:31AM (#2044995)
Most newer stock firmwares have support for things like DDNS on the router, though things like QoS, etc are usually left out of the stock firmware on consumer routers (being reserved for the 'professional grade' systems, so they can up-sell you).
Re:DD-WRT, I Know Where You Live by johnny22 on Tuesday December 28, 2010 @01:58AM (#2044870)
These firmware variants allow it to replace far more expensive devices. It's also quite small and requires little power.

I personally use an WRT54GL hardware to offer public internet access to folks at a coffeeshop. Here is what this $69 USD (when i bought it) device helped with.

Public Wireless - The range covers the entire store and the outdoor seating area. Here we mention terms of service and "beg" them to buy something with captive portal software. I'm not really sure how many clients it can handle, but it certainly meets the need.

Public Terminals - It serves up PXE boot images to 3 netbooted terminals. They run the Linux Terminal Server Project software.

It also makes it easy to set up firewalls, QOS, and anything else you might do with any other Linux box.

I think it's a great deal for $69 USD. This same device has been running for > 4 years!

Re:DD-WRT, I Know Where You Live by potatolicious on Tuesday December 28, 2010 @03:03AM (#2044966)
Older WRT54G's handled BitTorrent traffic terribly. The router will go and kill itself once every 15 minutes or so, necessitating a power cycle. In fact, power cycling the router became a normal part of its use.

DD-WRT (and Tomato) were very, very good solutions to this. Still are - there are still a number of popular routers out there where the stock firmware will choke on BT.

Re:DD-WRT, I Know Where You Live by pyre on Tuesday December 28, 2010 @03:28AM (#2044991)
Once the number of connections through the router reaches a certain point (in relation to BitTorrent traffic usually), the total d/l bandwidth (on any protocol) through the router dropped to ~30kB/s, in my experience. This is how I knew that it was time to power-cycle the router. Then all of the sudden all of my connections were flying again.
Re:DD-WRT, I Know Where You Live by drivebyacct2 on Tuesday December 28, 2010 @05:05PM (#2047007)
This is the exact reason I use it. DD-WRT was my last ditch chance before buying a new router. It now handles everything like a champ and I get built in DDNS, QoS, etc for free.
Re:DD-WRT, I Know Where You Live by pontifier on Tuesday December 28, 2010 @02:04AM (#2044884)
I have a couple of routers using dd-wrt. I have one of them set up on my roof, and another in my server room (a closet). The one on the roof acts as a wireless client to the main access point, and also as a wireless access point itself.

I have also set up a bunch of internal static ips for different machines and printers and such, and I seem to recall there was some ridiculously low number of slots to add them in default firmware on one of the routers I was using. (it has been a few years though).

Re:DD-WRT, I Know Where You Live by pronoiac on Tuesday December 28, 2010 @02:52PM (#2046523)
With QOS, one could leave their wifi open to help neighbors. If someone used p2p at full throttle, the standard firmware would let you either secure the connection or blacklist the (spoofable) MAC. With QOS, one could put the offending MAC into a class with a fraction of the total bandwidth - making the connection usable for everyone else, & not leading to a game of whack-a-mole with MACs.
Re:DD-WRT, I Know Where You Live by vetinari on Tuesday December 28, 2010 @04:11AM (#2045042)
I'm using it on different hardware (Netgear WNDR3700), because it has more functionality than stock firmware.

What I'm using: printserver (it has USB port, that is great for sticking printer in) and persistent VPN. It is definitely not just for the fun of it.

Re:DD-WRT, I Know Where You Live by anonymous246 on Tuesday December 28, 2010 @01:59AM (#2044873)
QoS (prioritize your ssh packets over your netflix stream over your http reqs); ssh server (so that you can have a SOCKS proxy to connect to from public Wifi); VPN endpoint; VOIP SIP proxy (to do fancy routing of SIP calls).

I'm pretty sure you can install a web browser and serve up static content from a consumer NAS too.

Basically, it lets you do a large subset of what you would be able to do with an always-on computer, but without burning all that power.

Re:DD-WRT, I Know Where You Live by evilduck on Tuesday December 28, 2010 @01:58PM (#2046347)
Some router models have USB ports and can be NAS devices too.

Also, my biggest reason for custom firmware: upping the radio range. Linksys' default output is very conservative.

Re:DD-WRT, I Know Where You Live by johnny22 on Tuesday December 28, 2010 @01:44AM (#2044855)
If you happen to have an original wrt54gl of version 1.0 or 1.1 you can reasonably use those as well since they ran Linux

The ones that came after switched to vxWorks and really slimmed down on the ram.

Then, then introduced the wrt54GL (the L meaning Linux)

Re:DD-WRT, I Know Where You Live by trafficlight on Tuesday December 28, 2010 @01:30AM (#2044843)
I work for a small WISP and we install DD-WRT on all of the routers we hand out. It's much easier to manage and diagnose connection problems with DD-WRT than with the default firmware.
Re:DD-WRT, I Know Where You Live by david2777 on Tuesday December 28, 2010 @12:19AM (#2044729)
I have it installed on my Belkin router because the stock firmware doesn't support Telnet connections. It's pretty great.
Re:DD-WRT, I Know Where You Live by jberryman on Tuesday December 28, 2010 @12:55AM (#2044781)
For those not familiar with the whole router firmware hacking thing, here is the backstory

http://www.wi-fiplanet.com/tutorials/article.php/3562391/The...

Also in addition to DD-wrt there is openwrt which I've got running on my router, and probably a number of others.

Re:DD-WRT, I Know Where You Live by jared314 on Monday December 27, 2010 @10:18PM (#2044492)
"Info Page" setting he talks about is:

Administration tab > Management sub-tab > Web Access section > "Enable Info Site"

Re:DD-WRT, I Know Where You Live by blinkingled on Monday December 27, 2010 @11:11PM (#2044601)
My SVN build of DD-WRT has a "No DNS Rebind" setting defaulting to true. Not sure if this prevents the attack - couldn't find easy steps to reproduce in order to verify.
Re:DD-WRT, I Know Where You Live by djacobs on Tuesday December 28, 2010 @10:19AM (#2045644)
Is there a solution to this yet? He says it affects you whether or not you have the info page enabled.
Re:DD-WRT, I Know Where You Live by EastSmith on Tuesday December 28, 2010 @10:44AM (#2045707)
The solution is to password protect the info page. I also checked if there is new firmware. Also, on my Buffalo I just set up SSH and stopped httpd. Didn't know how to do it, so I read here http://www.dd-wrt.com/wiki/index.php/Telnet/SSH_and_the_comm... and here http://www.howtoforge.com/ssh_key_based_logins_putty
Re:DD-WRT, I Know Where You Live by ck2 on Monday December 27, 2010 @10:27PM (#2044511)
I wonder if Tomato is affected.

I randomize the two mac addresses weekly anyway.

Re:DD-WRT, I Know Where You Live by jedsmith on Monday December 27, 2010 @11:48PM (#2044663)
> I randomize the two mac addresses weekly anyway.

Why?

Re:DD-WRT, I Know Where You Live by ck2 on Tuesday December 28, 2010 @12:54AM (#2044779)
Paranoia.

It's also a guaranteed way to get a new external IP assigned, even when renewing your DHCP lease fails to.

Re:DD-WRT, I Know Where You Live by newman314 on Tuesday December 28, 2010 @07:31AM (#2045294)
Do you have a script to do this or do you do it manually?
Re:DD-WRT, I Know Where You Live by ck2 on Tuesday December 28, 2010 @03:37PM (#2046668)
Manually.

I wish I could tell it to randomize when I shutdown but that would be pretty difficult to accomplish.

I wonder if I could make Tomato randomize them on startup (I power the router down nightly).