News for hackers. Stuff that matters.
Re:What Happened to the 100000 Hour LED Bulbs? by Jedd on Wednesday February 06, 2019 @03:52PM (#19099810)
A metal working friend told me recently that in Australia we're not meant / allowed to use fluorescent lights above lathes, as the flicker can disguise movement.

This is slightly worrying.

Re:What Happened to the 100000 Hour LED Bulbs? by masklinn on Wednesday February 06, 2019 @04:32PM (#19100228)
Yeah gas discharge lamps (CFL, neons, halides) will flicker at twice the mains' frequency on a single-phase circuit, makes it very dangerous to use them as e.g. factory lighting. You can mitigate that by using 3-phase power supplies, high-frequency controller, or by supplementing the basic lighting with incandescent bulbs around machinery.

The stroboscopic effect is really fun right until you're in a place with lots of moving parts at a multiple of the strobe frequency.

OTOH it's also used to fine-tune engine timing and such: set a stroboscope at a fraction of the frequency you want, the engine is properly tuned when everything looks completely stopped. Makes it very easy to notice mistiming.

Re:What Happened to the 100000 Hour LED Bulbs? by wlesieutre on Wednesday February 06, 2019 @04:50PM (#19100407)
Some turntables include a strobing light and rings of dots around the edge for different speeds. If it's spinning at the correct speed the corresponding dots will stand still.
Re:What Happened to the 100000 Hour LED Bulbs? by Jedd on Wednesday February 06, 2019 @05:58PM (#19101012)
Absolutely - the way he described it sounded like a horrendous accident waiting to happen, especially for smaller / home shops where the operator may not be aware of the problem. He was under the expectation that LEDs solved this problem, though he is using drop-in LED tubes that may have some better persistence through the off-cycles.

I do some occasional wood-turning, but usually augmented with ambient daylight - along with the dubious safety advantage of having a very noisy electric motor.

Plus I'm old enough to have used a timing light hanging off a distributor on my first car. Try explaining that to the kids of today. ; )

Re:What Happened to the 100000 Hour LED Bulbs? by afandian on Wednesday February 06, 2019 @06:04PM (#19101072)
A friend of my mother's lost half a finger to a strobing light and a circular saw. It does happen!
Re:What Happened to the 100000 Hour LED Bulbs? by cogman10 on Wednesday February 06, 2019 @08:34PM (#19102119)
Modern CFL drivers have frequencies in the tens of kilohertz.

The flicker is a thing from the past (or should be).