News for hackers. Stuff that matters.
Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by arkh on Thursday January 03, 2019 @03:21AM (#18813639)
Trackball under one thumb would be awesome. Then split the keyboard to have two independent parts so you can type with your arms parallel (even better, add a half-keyboard holder at the end of each of your chair armrests).
Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by germ on Thursday January 03, 2019 @04:04AM (#18813794)
That's pretty much what I did with Gergo[1], I got tired of the ergonomics of other boards and designed/built my own split board. It's smaller to reduce finger travel/extension, the layout is optimized for programming/vim and even tacked on a trackball. After too many terrible keyboards I made Gergo, and it is extremely comfortable to use for hours at a time!

There's some photos on my blog with the development PCBs (just got the production ready ones in and am shipping them out). Cases are in the works :)

I'm actually planning on adding additional modules (there's I2C contacts on every switch). And the trackpoint is next on my list.

[1] https://www.gboards.ca/

[2] https://pasteboard.co/HUI3Zqy.jpg

[3] https://blog.gboards.ca/2018/12/photodump.html

Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by tincholio on Thursday January 03, 2019 @07:01AM (#18814489)
Sounds like you want this: https://ultimatehackingkeyboard.com/

(I want it, too, but it's kinda pricey)

Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by jdhawk on Thursday January 03, 2019 @07:33AM (#18814618)
And the TrackPoint and Trackball modules are still "Under Development"

I know they claim that orders are shipping immediately, but a co-worker waited over a year for his.

Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by mondalaci on Friday January 04, 2019 @08:25AM (#18823794)
We have never stated this. Please stop spreading misinformation about us. We've made it crystal clear in our most recent blog post that "we expect to deliver every non-module UHK webshop pre-order in January to February". See https://ultimatehackingkeyboard.com/blog/2018/12/13/shipping... . Afterwards, we'll transition to on-demand manufacturing.
Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by cmiller1 on Thursday January 03, 2019 @08:44AM (#18815008)
I miss when laptops had trackballs. It was the only time in history when I preferred the pointing device on laptops to a standard mouse! (back in the 90s I used to use trackballs on my desktops)
Re:Adding a Trackpoint to an Inexpensive Mechanical Keyboard by sleepybrett on Thursday January 03, 2019 @12:35PM (#18817033)
I have not used this thing, and it's ugly as sin but this might do you: https://ultimatehackingkeyboard.com/ it has trackpoint and trackball modules.