No, the diodes don't, the drivers do. You are speaking to a technical audience ;)
> means that they do not emit light in certain frequencies causing objects to look dull/gray. Most LED lamps have a Ra value of 80, meaning that they emit on average in the 80% ...
Hardly. It means that they reproduce a set of 8 or 16 fixed frequencies from the ral pallete. It doesn't cover anything inbetween so it's just a rough rule of thumb. It doesn't cover colors in the far red (or was that violette on the other end of the soecteum?) at all.
Overall, overexposure of some frequencies, arguably to appear brighter and fuller, has damaged musuem pieces--Radiation stress, really. All they can do now is individual tests with photometric instruments, because they can't trust CRI. Same for horticultural lighting, which hasn't really taken of anyway.
Edit: Some manufacturers publish reference curves in the datasheets for their emitters, however I don't know how accurate these are under varying conditions and across batches.
[1] See e.g. https://ocw.mit.edu/courses/electrical-engineering-and-compu...
https://lavinia.as.arizona.edu/~mhammer/outreach/cdSpectrome...
(diffraction spectrometer from used CD/DVDs, very easy to make, and it costs ~$0)
Electrons in molecules have discrete energy states they can occupy, per quantum mechanics (the discrete set of wafunction solutions)[1]. Consequently they can only transition between states by absorbing or emitting photons of specific energy values (I believe it doesn't have to be exact due to scattering and various QED dynamics, but it has to be very precise). If your molecule is exposed to broadband light, a few photons will match those ionization energies, however the quantity should be small[2]. If your light source contains peaks though, and there happens to be important molecules whose energy transition matches your source (a big if), you're going to get a lot of ionization.
I should have mentioned a more established issue is fluorescent lamps emit more blue/violet and UV than LEDs (LEDs are usually packaged in plastic anyways, so even if the emitted there'd be no risk of uv exposure). In common molecules the more prevalent ionization energies are UV and beyond, that's why the risk is greater.[3]
[1] https://en.wikipedia.org/wiki/Energy_level
Electron states are central to molecular dynamics and chemistry.
[2] Infinitesimal ideally, just small in reality because of tolerances as mentioned
[3] https://en.wikipedia.org/wiki/Fluorescent_lamps_and_health#U...
https://www.scientificamerican.com/article/can-compact-fluor...
Plants are known to have been "burned" by LED, and not due to heat. Some turn pale if they don't get a broad spectrum, if I remember correctly.
I've seen 'drivers' that are nothing more than a resistor in series with the LED. So the LED, acting as a half-wave rectifier, causes the flicker. To your point, in this case the LED should be considered part of the driver.
Pulse width modulation. ;)
That's with a full rectifier. It's even cheaper to go half-rectifier and end up with 50/60Hz flicker. Being cheaper, this happens a lot.
I'm super sensitive to this flickering and will get nausea after sitting in some cheap LED lighting while other people hardly seem to notice.
I jokingly say that with cheap 50Hz LED lighting and 60fps screens, virtual reality now has a higher frame rate than real reality.
Is it just a matter of adding a bridge rectifier? I guess I'd need to add some resistors in there also to dim the emitters since they'll be on twice as often (to prevent premature burn-out).
Has anybody looked into this? I'll admit to being a bit eccentric.
White tubes are made of a mixture of phosphors, and each of them has a different time constant, meaning the flickering is noticeable as repeated changing of colors. Take a photograph (with a rolling shutter phone for example) of a fast moving object under fluorescent light and you'll see blue and yellow shadows from the changing light[1].
[1]: https://photo.stackexchange.com/questions/60701/why-do-i-get...
For people in North America, I'd recommend https://www.hyperikon.com/ for LED products from screw-in bulbs to large area lights with high CRI and no flicker (note: a few products don't have high CRI, so do check the product page). They offer a good range of color temperatures too.
> Most LED lamps have a Ra value of 80, meaning that they emit on average in the 80% of a spectrum that covers most of the visible light.
That's not what Ra means. It's not a percentage - in fact, something with a perfectly flat distribution covering all the visible spectrum would not have especially high CRI, because that's significantly different from the spectrum of blackbody radiation, on which CRI is based. The actual algorithm for calculating CRI doesn't fit nicely in a comment, but it's in the Wikipedia page: https://en.wikipedia.org/wiki/Color_rendering_index
Edit: missed the negation - CRI is not high for a perfectly flat spectrum.
This comment alleviated some of creeping anxiety from the above posts that I maybe hadn't done enough research (I hadn't, I just got lucky).
On the other hand, I have not seen a light source with low CRI that looked good illuminating people, natural materials, or anything else where subtle differences in color are relevant.
http://www.lutron.com/en-US/Pages/LEDCompatibilityTool/Compa...
Edit: Incidentally every single bulb (15 of them) is still working too, we haven't had any issues with them failing.
A lot of places use fluorescent lights which will look real weird if caught in the frame without some kind of flicker compensation just as one example so its pretty important.
There are x-rays of the LED here: https://www.chipworks.com/about-chipworks/overview/blog/true...
This is how we used to be able to measure speed of spinning objects too. :)
My first thought was: why don't they just filter the output? My guess is that perhaps LEDs are more efficient when being driven full ON or OFF rather than with a steady DC.
It's actually the opposite, efficiency goes down when current goes up.
I'm wondering how annoying those might be for a dog.
1. Lots of LEDs flicker. Shitty ones with twice the frequency of the main current (so 100/120 Hz) While you might not notice this it causes eye strain and can lead to eye fatigue, headaches, migraines.
2. Most LEDs have a low CRI (Color Rendering Index, or called Ra which is one standard to measure it), this means that they do not emit light in certain frequencies causing objects to look dull/gray. Most LED lamps have a Ra value of 80, meaning that they emit on average in the 80% of a spectrum that covers most of the visible light.
If you look around you'll be able to find reasonably priced LEDs with 90+ Ra and no flicker, but its a pain in the ass to research it. Especially if you need something more special like a LED light strip for your kitchen.