https://sites.google.com/site/undefinition/isetta
He mostly just lays out the speaker and crossover design; but as he mentions a search for "TPA3116 2.1 amp" will give you lots of results on Amazon, AliExpress, and Parts Express.
PE's forums are good, lots of people have tackled similar projects:
http://techtalk.parts-express.com/forum
For anybody else interested in this hobby, there are lots of fantastic kits out there, primarily for bookshelf/tower speakers and subwoofers.
https://www.parts-express.com/cat/speaker-kits/286
The product page for the C-Notes (a fantastic value at $100/pair!) kit has a build video which gives you a great idea of the process and the tools you'll need. Process is similar for any flat-pack kit.
https://www.parts-express.com/c-note-mt-bookshelf-speaker-ki...
Of course you can also go as far down the DIY hole as you like, designing your own electronics and selecting drivers, etc.
There's about $80 worth of drivers in there, which is bonkers for a $100 kit that also includes crossover parts and MDF cabinets.
For comparison, the $130 Overnight Sensations kit contains about $55 worth of drivers. That's a good deal, and consistent with other DIY kits... and it illustrates what an outlier the C-Notes are.
(The reason why the C-Notes are so affordable is because Parts Express and Dayton share corporate ownership, so presumably they're about to source those Dayton drivers for next to nothing)
FYI there's an MTM (two woofers, one tweeter) version of the C-Notes coming in ~45 days for $100/speaker ($200/pair)
Here's how I did it:
Last year, I visited Taiwan and China, I basically went to scout for speaker suppliers. I shortlisted a couple, but I realized, the popular they are, the pricier they are - regardless of the quality. Then, I realized something shocking. Actually, most speaker manufacturing is done in Nanjing (and one more location starting in N, forgot). These factories just stick the brand names on top and license it to these "big brands". And you pay a premium for that. So, I visited one direct supplier in Nanjing. It was a very small shop. I just walked in, placed an order for a pair. The whole set of 4 speakers (2 woofers and 2 mid-ranges) costed me in total of $200 US roughly. I purchased two 6.5" aluminium cone woofers and 2 golden capped full ranges. I like woofers with large Xmax, so I bought these for bass units.
You can purchase from AliExpress too, although it's slightly pricier. But most speakers from China, contrary to popular belief, are very very high quality. In fact, the consumer audio space such as Sony, Samsung, etc. use much lower grades than what's normally found on AliExpress.
As for amplifier, buy a half-decent board. Strip out all the cheap components, spend 3x the price of the board on really good quality components. For the TPA3116D2 board, this place is a good start [4]
Hope this helps. Cheers.
[0] https://www.instagram.com/p/BplhIIqHNhl/
[1] https://www.instagram.com/p/Bpl71mUHLbm/
[2] https://www.instagram.com/p/Bm02F4OgAwX/
[3] https://www.instagram.com/p/Bppl-dsHWuW/
[4] http://www.diyaudio.com/forums/diyaudio-com-wiki/252663-tpa3...
I am not able to find the woofers, probably need more deeper digging.
In regards to your project - it depends how many sub-projects you want to spawn. I've got https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=m570.l1... hooked up to my PC and some old speakers - 3.5mm jack, USB DAC and Bluetooth support. It's variable voltage up to 12V (I think). Funnily, if you supply it with 5~7 volts, you'll get a "low battery" audio cue - despite there being no battery connector anywhere.
The newer version of this has the volume knob in a silly place.
I've heard AirPlay "just works" but have never tried it.
this week I’ve been looking into making a wireless speaker similar to a Sonos play:1. In terms of the streaming mechanism is was going to use a raspberry pi running as a snapclient, wired to a class-d amp board and a, say, 3” driver. I thought I would find a load of projects using a pi + amp + driver in a small box combination, but I must be looking in the wrong place.
Does anyone have any top tips of examples of setting something like this up? What amp / driver combination to use? I’m not looking for anything amazing, and I’m sure round 1 will be a learning experience, but any help appreciated.