He isn't ionizing the gas, he is increasing the gas pressure by heating it. "Only instead of using those pressure gradients to move an axle or a wheel, he’s forcing ions through a membrane." See next for why that is important.
> Why don't the whole hydrogen atoms go through the membrane to the lower pressure area?
He uses a semi-permeable membrane http://en.wikipedia.org/wiki/Semipermeable_membrane. They also have use in chemical applications such as batteries and fuel cells.
The membrane blocks the atoms, but allows the ions (protons) through. It does require a substantial amount of pressure for it to work. That is where the heat -> pressure comes into effect, and why the reconstituted hydrogen on the "cold" size has to be compressed and pumped back into the "hot" side.
While this sounds a little like a perpetual motion machine, it isn't because the sun's heat is adding the energy that is being extracted via the electrons.
> How does he alternate which side is heated? How does he cool the other side?
He heats one side and cools one side, no alternating. The heating (and cooling) cause a pressure differential, which drives the reaction via the semi-permeable membrane.
---
I suspect there are some pretty substantial challenges remaining before this becomes a sizable / viable energy source.
It sounds like it is related to proton exchange fuel cells, except instead of using the catalyst + oxidant to drive the reaction, it is using pressure.
Refs:
http://en.wikipedia.org/wiki/Fuel_cell#Proton_exchange_fuel_...
http://auto.howstuffworks.com/fuel-efficiency/alternative-fu...
Also, is there really enough hydrogen ionizing at 400C?
The article says it is compressed in order to move it back to the high pressure side.
> Also, is there really enough hydrogen ionizing at 400C?
I don't believe (traditional) ionization is occurring. My guess is that it works at the molecular level like reverse osmosis works with salt water to form fresh water. http://en.wikipedia.org/wiki/Reverse_osmosis The dissociation of the hydrogen atoms into protons and electrons is through heat and pressure, facilitated by the semi-permeable membrane.
Note that the membrane is key and is very unique. Johnson [...] proved he could make a ceramic membrane capable of withstanding temperatures above 400 degrees Celsius. A semi-permeable plastic membrane is non-trivial. A semi-permeable ceramic membrane that passes protons, strips electrons, and blocks hydrogen atoms while running at 400^C has to be really, really tough to do.
The electrons and protons recombine on the cold side to reform hydrogen. That hydrogen has to be compressed sufficiently to move it back to the "hot" side of the system. This is probably a pretty substantial compression and will probably limit the efficiency of the system - it also raises the "perpetual motion machine" red flag in my mind, except the sun is adding lots of thermal energy to make it go for real.
I'm picturing the system working at a molecular level like reverse osmosis of seawater: http://en.wikipedia.org/wiki/Reverse_osmosis. Reverse osmosis requires a substantial amount of pressure (~1000 psi) to force the water through the semi-permeable membrane while the salt cannot pass through the membrane and thus stays on the salty side.
Because that's what the membrane filters do. See: http://en.wikipedia.org/wiki/Proton_exchange_membrane http://en.wikipedia.org/wiki/Proton_conductor Mainly they work on size - small versus really small.
Again, at a guess, it doesn't need to cool the other side - it's not a temperature gradient, it's a concentration gradient. And since the ions are being reacted back to H2 at a brisk rate, it's not a big problem. The more thermal energy you could maintain in the ions the better, because they wouldn't need as much heating once they'd been recycled.
It has a whiff of perpetual motion machine to it. Maxwell's Demon, I think.
The sun delivers on the order of 1000W per sqm during the day, so (eg.) focusing 100 sqm into 1 sqm == 100,000W. 12 hours of daylight will then give you a theoretical production of 1.2MWh per day, but it's usually a lot less, due to the angle of the sun in the morning/evening and inefficiencies in your energy capture.
My intuitive understanding is that, as you heat the absorber, it becomes hotter and hotter, until it reaches the same temperature as the sun's surface. At this point, the absorber (also a blackbody) radiates just as much energy as it receives from the sun; thus there is no more heat exchange. Otherwise, you would be taking two objects at the same temperature and making one hotter and the other one colder with no work from outside the system, violating thermodynamics.
There is a more formal study in solar energy books like (http://books.google.com/books?id=81WI2LwrpkcC&lpg=PA25&#...) or (http://www.physics.drexel.edu/~jenks/Solar%20Energy.pdf) (PDF, page 21 onwards is quite relevant).
Think of it in terms of photons - if you're collecting and concentrating photons, the upper limit is the total number of photons which the sun produces. I'm pretty sure that if you focused all of those into a square meter of the earth's surface, then it'd reach more than 5760K.
Where did the other laws go?
> The second issue is that solar heating is due to radiation, not conduction/convection, so there's no heat exchange as such.
I don't understand how there could be "solar heating" but no "heat exchange".
Unless I misunderstood the papers I cited, the efficiency equations show that there is a limit (efficiency drops to 0% with Ts=Ta), but I'll still try to address the "intuition" part of your post.
Let's say we are in a black room with no windows, everything being at room temperature. I use lenses to concentrate the infrared light from the walls onto a black cube. Would the cube heat up from the concentration of photons?
Hmm, I thought that "heat exchange" referred to direct transfer of heat energy, perhaps I'm misremembering. http://en.wikipedia.org/wiki/Heat_transfer#Radiation doesn't seem to differentiate, but bear in mind that there's no way to focus molecular vibration with a mirror.
And if more photons hit the cube with your lens than without it, then yes, the cube will heat up.
That's a perpetual motion machine.
btw, from what I've been reading, it looks like you're right (ie. you can't heat anything directly to > the sun's temperature) but I can't find any explanation which makes any intuitive sense at all, just lots of stuff like http://en.allexperts.com/q/Physics-1358/Black-body-radiation... (note the hand waving) or else a bunch of hard core entropy equations.
So you can't focus sunlight to more than 6000k however many mirrors you use.
As a trivial example disproving your claim, energy from the Sun can be collected in solar panels that can be used to run devices that can hit any temperature you want. For an extreme example, for fusion experiments they produce temperatures of over 11,000,000 degrees C.
For another trivial example, most of us have refrigerators that can transport heat energy from a colder place (the inside of the fridge) to a warmer place (your kitchen).
As to the rest, can't help you there. IANAPP :)
Why don't the whole hydrogen atoms go through the membrane to the lower pressure area?
How does he alternate which side is heated? How does he cool the other side?