News for hackers. Stuff that matters.
Re:Real world SSD wearout by pkaye on Monday August 27, 2018 @01:11PM (#17852756)
I've worked on SSD firmware before. Obvious the implementations may vary but typically there is no hard failure. These are just projections based on data sheet endurance specs. What you need to look at additionally is how many defect blocks there are (another SMART spec) as it will start to rapidly increase as more and more flash blocks go bad.

When the level is low, capacity shouldn't decrease as there are spare blocks. There should be no data loss expect by catastropic block failurs (some SSD have internal RAID like redundancy.) There might be a slight performance decrease as the error correction algorithms become more active.

Re:Real world SSD wearout by komali2 on Monday August 27, 2018 @01:33PM (#17852901)
Those are firmware level error corrections? Or like, driver?
Re:Real world SSD wearout by pkaye on Monday August 27, 2018 @02:26PM (#17853233)
Its in the controller. A combination of hardware and firmware. A large percent of them will be handled by the hardware but a small number requires firmware intervention.
Re:Real world SSD wearout by mey on Monday August 27, 2018 @01:43PM (#17852968)
SSD have their own correction and wear leveling algorithms. In this case they were referring to device firmware.