News for hackers. Stuff that matters.
Re:Why getting back to the moon is so damn hard by CryoLogic on Friday July 20, 2018 @02:15PM (#17577425)
These are all rockets. What happened to attempts and more permanent space launch fixtures like: https://en.wikipedia.org/wiki/Space_elevator

I am under the impression many other methods of getting into space have been hypothesized but never attempted.

Re:Why getting back to the moon is so damn hard by headcanon on Friday July 20, 2018 @04:08PM (#17578490)
A space elevator is a long ways off - assuming that human interest in space continues and technology develops at similar rates to today, I wouldn't expect something like that to be constructed for at least a couple centuries. Hopefully I'm wrong, I'd love to see something like that, but a project of that sort would make the space station look like a dinky house-boat in terms of scale and complexity. As crappy as rockets are, I expect we will continue to be using them for the duration of our lifespans.
Re:Why getting back to the moon is so damn hard by credit_guy on Saturday July 21, 2018 @01:49AM (#17580868)
What do you think about space elevators for asteroid mining? A large asteroid has a non-negligible escape velocity (e.g. for Ceres it's 500m/s), so taking stuff from them via regular rockets requires a significant amount of fuel. On the other hand, a space elevator could just be possible with our current materials and technology.
Re:Why getting back to the moon is so damn hard by headcanon on Tuesday July 31, 2018 @04:40PM (#17656882)
I think a mass driver in most cases would be simpler and more economical. We would use them on earth if we didn't need to worry about the atmosphere.

A Space elevator would require that the body spins fast enough that the centripetal acceleration would equal the gravitational acceleration. Ceres spins roughly every 9 hours - I haven't done the math but that seems like it could work in that case, but even so I would still vote mass driver.

Re:Why getting back to the moon is so damn hard by kentm on Friday July 20, 2018 @02:17PM (#17577447)
At least for the space elevator, we do not have the necessary materials to create it. There's been some hypotheses that carbon nanotubes could have the required strength, but we cannot produce strands long enough.
Re:Why getting back to the moon is so damn hard by athenot on Friday July 20, 2018 @02:23PM (#17577497)
And there are other challenges, including:

- Wind: variable speed & direction, can be high.

- Ionosphere charges: the sapce elevator would essentially be a giant ground rod in the ionosphere… that might attract a few bolts of lightning.

Re:Why getting back to the moon is so damn hard by Retric on Friday July 20, 2018 @02:42PM (#17577703)
You don't need to attach a space elevator to the ground. Keeping one end of the tether at 100,000 feet still makes access to space cheap without many of the security issues of a ground based tether.
Re:Why getting back to the moon is so damn hard by jrockway on Friday July 20, 2018 @02:48PM (#17577754)
Interesting. How do you get stuff to 100,000 feet? I'm imagining some sort of cargo helicopter but that is probably not at all the right idea.
Re:Why getting back to the moon is so damn hard by Sohcahtoa82 on Friday July 20, 2018 @02:57PM (#17577833)
We used a balloon to lift Felix Baumgartner 135,000 feet for his record jump [1]. Could this be scaled up for larger payloads?

[1] https://en.wikipedia.org/wiki/Felix_Baumgartner

Re:Why getting back to the moon is so damn hard by Retric on Friday July 20, 2018 @03:00PM (#17577861)
Rockets or balloons can get to that altitude fairly easily. You could even build a second elevator that gets to 100,000 feet hanging off a balloons.

But, really it's just a security precaution to prevent terrorists or whatnot just flying into the thing.

Re:Why getting back to the moon is so damn hard by dogma1138 on Friday July 20, 2018 @08:49PM (#17580120)
Forget terrorist, an accident is more likely including earth quakes, tsunamis and storms and one of the biggest problems is that while building it might just be the easy part maintaining it and decommissioning it when the material fatigue sets in is a much more complicated mess.

Depending on the failure you might have a cable with a length greater than the earth’s circumference if we are putting it to a geostationary orbit falling down to earth.

For a space elevator to work it’s center of mass needs to be at or above geostationary orbit, depending on the counterweight at the end of the tether it will likely be at least 50,000KM long.

Re:Why getting back to the moon is so damn hard by beamatronic on Friday July 20, 2018 @05:34PM (#17579143)
So what we need to do is start building down towards Earth from an anchor point
Re:Why getting back to the moon is so damn hard by rndmize on Friday July 20, 2018 @02:47PM (#17577742)
Other means of launching would be massive infrastructure projects, have huge power requirements, or simply might not be practical with current technology (as with a space elevator). I would guess that the most practical would be some sort of EM launch system + rocket/ramjet, if you could figure out how to transition from the first part to the second, but who knows.
Re:Why getting back to the moon is so damn hard by thx11389793 on Friday July 20, 2018 @02:24PM (#17577511)
While the materials don't quite exist for a tether that can survive the forces needed to escape Earth gravity, the wiki you linked mentions the moon as a place where current materials could be used.

Makes me wonder about the near-term viability of an elevator on Mars, which IIRC has 2/3rd Earth's gravity...

Re:Why getting back to the moon is so damn hard by eesmith on Friday July 20, 2018 @04:22PM (#17578605)
The WP page describes the viability of a Martian in the paragraph before the Lunar one.
Re:Why getting back to the moon is so damn hard by jhallenworld on Friday July 20, 2018 @02:27PM (#17577533)
A launch loop is perhaps a better solution (meaning no material breakthrough needed):

https://en.wikipedia.org/wiki/Launch_loop

Re:Why getting back to the moon is so damn hard by bufferoverflow on Friday July 20, 2018 @02:53PM (#17577801)
How exactly are you going to build a 50 mile tall structure? Current world record is Burj Khalifa, which is 828 meters tall, which is 0.51 miles. We're not even close.
Re:Why getting back to the moon is so damn hard by jhallenworld on Friday July 20, 2018 @04:50PM (#17578803)
Actually the answer is very interesting. The launch loop is a so-called active structure. The momentum of the rotor is raising the structure (notice that there are cables stays, but they are to hold it down, not to support it). In this way active structures can be made to any height, taller than material properties that limit static buildings.

At some point this technique will have to be used to make the next world's tallest building. Disadvantage is that the power must be kept on or the building collapses.

Relevant Isaac Arthur video:

https://www.youtube.com/watch?v=zSimYARyL2w&index=15&list=PL...

https://www.youtube.com/watch?v=5QLOAQmZbZs

Re:Why getting back to the moon is so damn hard by phreeza on Friday July 20, 2018 @04:51PM (#17578807)
Isn't the idea with the launch loop that it suspends itself by electrical force? The downside being that when it looses power it comes crashing down.
Re:Why getting back to the moon is so damn hard by andbberger on Friday July 20, 2018 @03:20PM (#17578046)
On the ground.
Re:Why getting back to the moon is so damn hard by Sohcahtoa82 on Friday July 20, 2018 @03:01PM (#17577869)
Getting into space isn't hard. It's STAYING there that's difficult.

Relevant XKCD What If: https://what-if.xkcd.com/58/

Re:Why getting back to the moon is so damn hard by MereInterest on Friday July 20, 2018 @03:29PM (#17578123)
This is why a space elevator needs to go much higher than low-earth orbit. Reach all the way to geostationary orbit, and then you are already going fast enough to stay in space.