Its actually the same with the washingmachine. They made them from thick steel because manufacturing costs hadn't driven to the quality of build and design which worked with thin sheet steel. Once they got over a million, and developed tighter tolerances, and understood in-field lifetimes, they could use thinner stock because they could stamp a pattern into it which added 3D shape-driven strength, and avoid 3lb of steel cost. I know we like to imagine them rubbing their hands with gleee at the future sale from it rusting out, but they really dont: they are driving down front cost, and if this reduces lifetime at end, thats a cost shifting problem they are not maximising to. If they were told to reduce input cost but preserve maximum lifetime, they might drive 1mm of steel back in, or thicker dip-time or better paint or move to less rust prone mix of metal or any of 100 things.
I'd then argue that there's still some malevolence in there and that would be the maximum lifetime they calculated. Clearly the older stuff lasts longer so they miscalculated how long the new stuff should last and at some point it becomes the new norm. "Oh yeah, washer's aren't supposed to last more than 7 years"
If we said that 95% of the product must be demonstrated to be capable of lasting 15 years, and could test it, we'd be driving to airframe resilience engineering: the jumbo jet is designed to work inside the metals fatigue point almost indefinitely, modulo cracking.
Thats not how we make consumer goods.
This is seriously concerning. I recently bought a new car, and was surprised how much push back there was on buying an extended warranty past the normal warranty. The salesperson argued to sell a multi thousand dollars warranty for the length of the normal warranty that essentially gave me "free" oil changes but was defensive about me spending a few more hundred dollars to extend it for an extra 2 years!