News for hackers. Stuff that matters.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by TylerE on Tuesday July 03, 2018 @02:33PM (#17452622)
The locomotives, not all the rolling stock. I'm not saying it wouldn't be hard/expensive, but it seems better to spend money on things that will be useful for decades rather than stopgaps that just kick the can a little further up the road.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by donarb on Tuesday July 03, 2018 @02:47PM (#17452715)
If you remove the block signaling system and use in-cab signaling, you still need to know where the back of the train is. Otherwise a train could run into the back of another in the fog or heavy rainstorm. Currently, railroads use FREDs (flashing rear end device) on the last car of the train. Some FREDs are more intelligent than others but would benefit from being able to send out their location via GPS.

https://en.wikipedia.org/wiki/End-of-train_device

Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by TylerE on Tuesday July 03, 2018 @03:38PM (#17453044)
Pretty sure all the In-Cab systems still have axle counters and track circuits.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by Retric on Tuesday July 03, 2018 @02:57PM (#17452786)
Longest trains are under five miles so you could use that or whatever the limit for that line is as a safe baseline. Unless you're worried about trains separating.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by adrianN on Tuesday July 03, 2018 @03:01PM (#17452814)
You are worried about trains separating.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by AnimalMuppet on Tuesday July 03, 2018 @03:43PM (#17453080)
Even more if you have distributed power. A train can separate, and both halves can keep moving.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by Retric on Tuesday July 03, 2018 @08:49PM (#17454656)
That's not an actual problem. You simply have 2 trains each broadcasts it's location. It's unexpected separations that might be a problem, but those are currently very rare and dealt with seperatly than static signals.

It's like you need to design a nuclear reactor to deal with an aircraft hitting it. You don't need to automate the response becase that's a rare situation.

Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by TylerE on Tuesday July 03, 2018 @10:36PM (#17454947)
Plus with an actual separation the brakes will dump anyway and things will stop... well, not fast, but as quickly as they're capable of.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by AnimalMuppet on Thursday July 05, 2018 @12:10PM (#17464355)
Well, I read about one instance where it happened, and the brakes didn't apply. (Not sure how that could happen other than a mess-up in building the train. You'd just about have to have both angle cocks closed.) Both fragments continued, for miles.

Can't cite a source (I think I read about it on the Altamont Press discussion board). And that's only one instance. And it could have been reported incorrectly. But it appears to be possible for this to happen.

Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by adrianN on Tuesday July 03, 2018 @03:01PM (#17452811)
You can use block signalling with in-cab signals.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by Doctor_Fegg on Tuesday July 03, 2018 @02:48PM (#17452727)
Most British passenger trains are multiple units (and most British trains are passenger trains), so there's effectively little distinction between locomotive and rolling stock.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by TylerE on Tuesday July 03, 2018 @03:39PM (#17453053)
You have a cab at both ends. In between are just slave units. No cabs, even if they have motors.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by blibble on Tuesday July 03, 2018 @08:22PM (#17454572)
it's normal for a train to be made up of multiple independent units[1], which are then coupled together to make a longer service

each unit has two cabs (one at each end)

a common configuration is a 12 coach train made up of 3 x 4-long-units, which would have 6 cabs

that's a lot of upgrading

[1]: http://extra.southernelectric.org.uk/news/southern/img/colin...

[2]: http://extra.southernelectric.org.uk/news/southern/img/colin...

Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by eponeponepon on Tuesday July 03, 2018 @02:40PM (#17452677)
But when the people who hold the pursestrings are looking no further ahead than their next election, "useful for decades" means nothing at all to them.
Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by adrianN on Tuesday July 03, 2018 @02:39PM (#17452669)
You're right of course, just the locomotives.

If budgets always allowed us to do what's best over the next decades the world would probably be a much nicer place.

Re:The Dangers of Train Yards, Through the Eyes of Railroad ... by LoSboccacc on Tuesday July 03, 2018 @05:16PM (#17453672)
And not all locomotives, only the new one that reach speed where the signal is not visible in the given timeframe.