https://imgur.com/gallery/f1EGp
on this page is a photo of a 1200-pair: http://cityinfrastructure.com/single.php?d=RuralOutsidePlant...
"Ah there's your problem: you've patched the Fire Engine Red pair, it's meant to be the Ferrari Red. Rookie error."
It’s actually pretty simple. There are only 10 colors: blue, orange, green, brown, slate, white, red, black, yellow, and violet. They’re grouped in “binders” (using colored strings). You’re likely familiar with the first four pairs from network cables (which omit the white/slate pair). After cylcling through blue through slate paired with white through violet (25 pairs), the wires are bundled with binders starting with blue/white string. That gets you to 625 pairs (the first picture posted above is 600 or 625 pairs). After that, the binder groups are bound in a similar fashion (typically if you’re going beyond 625, the slate/violet binder is omitted to get a nice round 600 in the first group).
Wikipedia has a good article: https://en.m.wikipedia.org/wiki/25-pair_color_code
100-pair cable is only about 3/4” diameter. I have a 24-line 1A2 telephone that uses 75 pairs just to connect to the phone switch and two 100-pair cables feeding a telephone display case in my living room.
It takes me about a half hour to punch down 100 pairs on a 66-block. Old school telecom guys could probably do it in under 10 minutes.
At least I hope so, if not, then they really should exist.
Seattle, for example, also has the Elliot CO in Belltown: http://www.co-buildings.com/wa/206/