The most recent 3-D printing with glass I have read about creates a piece of fused silica, which is even harder to fabricate and more useful in lab work. They print it from a silica infused polymer, and then each section is fused with the laser, and the polymer burns away, leaving quartz. Seems quite workable to me. This was covered in an article published recently.
edit: one article that gives a good overview: https://www.azom.com/article.aspx?ArticleID=15114
a more consumery article: https://www.smithsonianmag.com/innovation/you-can-now-3d-pri...
There are still things best done with tubes, and in some ways tubes are much better than transistors if it comes to reliability, mostly related to the sheer physical size preventing as-trivial cases of ESD/EMP fried LNAs in radios. Or the HF switch selecting between antennas and RX/TX. But this is probably a minor concern in practice.