News for hackers. Stuff that matters.
Re:FCC votes unanimously in favor of using whitespace for 's... by dangrossman on Thursday September 23, 2010 @03:04PM (#1720860)
Opening up the 2.4ghz spectrum to everyone didn't create ubiquitous free internet, nor even ubiquitous free-with-ads internet. Why are some postulating that this will mean the end of cellular carriers and that phones will somehow use this spectrum for free?

In terms of utilizing frequencies that can provide connections over longer range than 2.4GHz, that's exactly what WiMax already is. And WiMax specs aren't leading us towards any kind of free internet, they're the new high priced 4G service you now buy from the same cell companies as always.

Re:FCC votes unanimously in favor of using whitespace for 's... by billybob on Thursday September 23, 2010 @05:30PM (#1721551)
I thought the point was that this is UNLICENSED spectrum.

I can't legally set up a WiMax tower like I can set up a WiFi hot spot. Doesn't opening whitespaces mean that you could set up, say, a city-wide access point without asking permission? Or did I miss something? If that's the case, it's likely to spawn LOTS more competition than assigning frequencies to the highest bidder - which is actually 0 competetion, actually; it's a granted monopoly.

If I'm understanding right, there could be networks that are not for profit, or indirectly so. Like, maybe a hospital could have a Wi-Fi-like network that spans the whole city, which their ambulances could use to transmit vitals to the hospital while bringing in a patient.

Re:FCC votes unanimously in favor of using whitespace for 's... by photon_off on Friday September 24, 2010 @12:54AM (#1722729)
I'm not sure if this answers your question, but any unlicensed communicate device has limitations on the amount of power it's allowed to radiate. Generally, that's the limiting factor in how far-reaching the signal is. Of course, you could transmit in a very narrow angle using antennas and get quick respectable distances, but then you lose omnidirection.
Re:FCC votes unanimously in favor of using whitespace for 's... by someone_here on Thursday September 23, 2010 @03:35PM (#1720995)
Opening up 2.4Ghz was done because of microwaves leaking from appliances.
Re:FCC votes unanimously in favor of using whitespace for 's... by VladRussian on Thursday September 23, 2010 @03:39PM (#1721010)
Simplistically, there 2 parts - backbone and last mile. The last mile part wasn't solved by 2.4GHz, yet the situation has significantly improved - Google free wifi for example is an example of a [still limited] solution to the "last mile". Any significant improvements upon WiFi will make "last mile" solvable much better and cheaper in many more places.

Cell phone wise - lets say we have 3000ft range in superWiFi instead of WiFi 300ft. Would the overlaps be enough to imagine a robust voice/data carrying by hoping from router to router (FidoNet style) with coverage similar to the early days of cell phones?

So while there wouldn't be an end to the carriers (whom we're kidding - the Ma'Bell is practically still alive) there are big improvements to come.

Re:FCC votes unanimously in favor of using whitespace for 's... by InclinedPlane on Thursday September 23, 2010 @04:03PM (#1721131)
I wish I had the expertise or the time to give a better rebuttal to this, instead I'll just point out a few things:

First, the 2.4ghz spectrum is not the best for wireless comms, there were many reasons for opening up that spectrum and very few of those reasons were because it was an optimal signal frequency.

Second, bandwidth. The 2.4ghz spectrum is confined within an 82mhz band. The available whitespace spectrum has a significantly larger bandwidth.

Third, technology. 802.11b and g are based on technology that is now stale by more than a decade. Today's wireless broadband tech makes those protocols look like a 56k modem.

The combination of these factors allows for stunning possibilities. More efficient broadband technologies, better broadcast frequencies, more bandwidth. These allow for more users with higher data rates at farther distances from base stations. It also makes things like bridging access points a lot easier. There's little reason to believe that in 10 years whitespace broadband access points won't be utterly ubiquitous.

As for WiMax, that's not open spectrum, consumers can't buy a WiMax AP on newegg. That makes it an entirely different beast.

Re:FCC votes unanimously in favor of using whitespace for 's... by wmf on Thursday September 23, 2010 @04:19PM (#1721234)
In large cities there is less than 82 MHz of white space available AFAIK. Also, white space channels are 6 MHz wide while 802.11 channels are 20 MHz.
Re:FCC votes unanimously in favor of using whitespace for 's... by photon_off on Friday September 24, 2010 @12:51AM (#1722724)
What does an 82MHz band really mean? I understand that devices are confined to communicate within the frequencies of 2.4GHz +/- 41MHz (come to think of it, that's ridiculously narrow... a margin of .00000034%), but is band related to actual bps bandwidth? If so, how? And why is the available band so narrow?
Re:FCC votes unanimously in favor of using whitespace for 's... by wmf on Friday September 24, 2010 @01:22AM (#1722797)
Throughput is directly related to bandwidth. Modern radios have a spectral efficiency of 5-15 bps/Hz (depending on range, noise, and multipath), meaning that a 6 MHz white space channel is worth 30-90 Mbps, a 20 MHz 802.11 channel can give 100-300 Mbps, and the entire 2.4 GHz band theoretically has 410-1230 Mbps of capacity.
Re:FCC votes unanimously in favor of using whitespace for 's... by photon_off on Friday September 24, 2010 @02:36AM (#1722918)
Very interesting. What is currently limiting the amount of bandwidth per Hz? IANAP, but why can't you just lock in a very specific frequency range, and blip morse code at a very high clock speed (say, 100MHz), and get a huge bps/Hz?
Re:FCC votes unanimously in favor of using whitespace for 's... by loup-vaillant on Friday September 24, 2010 @03:55AM (#1723031)
The only way to transmit information over a wave of fixed frequency is to mess up with that wave (if the wave is really fixed, it doesn't carry any information). When you mess up with the wave, you necessarily fluctuate it's frequency. So you have to send you signal within range of frequencies.

Intuitively, the more information you want to transmit, the more you have to mess up with the frequencies. Hence the bandwidth per Hz thing.

(Disclaimer: I don't know much about the subject. Corrections, clarifications, and precisions are welcome.)

Re:FCC votes unanimously in favor of using whitespace for 's... by photon_off on Friday September 24, 2010 @02:59PM (#1724909)
That's not the only way to transmit information with radio waves. What's wrong with this: To send binary data, you could either send the pure signal (1), or you could not send any signal at all (0). As long as the clock cycles of the sender and receiver are the same, it should work (eg: 100MHz).

Given that this isn't the way it works, there must be some major flaw with it.

Re:FCC votes unanimously in favor of using whitespace for 's... by loup-vaillant on Friday September 24, 2010 @07:10PM (#1725752)
When you do a Fourrier transform of a signal of finite time, you notice that there's more than the fundamental frequency. Basically, when you cut off a signal, then resume it, over and over, then that signal ceases to be of only one frequency.

That's why your method doesn't work.