News for hackers. Stuff that matters.
Re:San Francisco’s Seismic Gamble by gibsonf1 on Tuesday April 17, 2018 @10:03AM (#16858366)
High rises in general are designed to sway in an earthquake - that sway absorbs the horizontal forces being applied - similar to a tree. If an earthquake gets sufficiently large, say larger than any known measured earthquake to date, that sway differential would increase enough that buildings would either hit each other, or the building would sway beyond the ability of the structure to recover and fall over. A standard approach for tall buildings is to incorporate either a dynamic weight high in the tower to counterbalance the sway so it doesn't go critical, or incorporate dynamic elements in the foundation system. In general, if a modern high rise is falling over, all buildings without the benefit of this level of modern engineering have already fallen over.
Re:San Francisco’s Seismic Gamble by ggcdn on Tuesday April 17, 2018 @11:53AM (#16859485)
> A standard approach for tall buildings is to incorporate either a dynamic weight high in the tower to counterbalance the sway so it doesn't go critical, or incorporate dynamic elements in the foundation system.

As a structural engineer on the west coast, I can say that neither of these are standard. Tuned mass dampers (TMDs) are commonly used for reducing wind-induced vibration, but not for seismic applications. Nor have I ever designed, seen, or heard of 'dynamic elements in the foundation'

The reason you can't rely on TMDs is because they are tuned to a structure's elastic period of vibration. That is to say, the materials are still in their elastic range. When a ductile structure is subjected to a sufficiently large earthquake, elements of the seismic force resisting system (SFRS) will yield. Hence the period will elongate. Hence the damper will be detuned and may not provide any benefit at all.

Re:San Francisco’s Seismic Gamble by gibsonf1 on Tuesday April 17, 2018 @04:10PM (#16861854)
A link to the next generation TMD's to handle earthquakes: tuned mass blocks, orthogonal poles, and torsional pendulums (TMDPP) : https://www.hindawi.com/journals/sv/2017/5834760/
Re:San Francisco’s Seismic Gamble by ggcdn on Tuesday April 17, 2018 @05:55PM (#16862661)
1) I'm not saying there aren't novel solutions - there's a whole category of devices that use active control. I'm saying its not common place.

2) From what I understand, China has a completely different design philosophy. They design structures to remain elastic, under certain earthquakes, which would then allow for TMDs.

Re:San Francisco’s Seismic Gamble by abduhl on Tuesday April 17, 2018 @11:55AM (#16859499)
I think he is referring to base isolation which, I agree, is non-standard.
Re:San Francisco’s Seismic Gamble by gibsonf1 on Tuesday April 17, 2018 @04:10PM (#16861852)
I meant standard for the really big buildings under the highest stress. For lesser challenges, agreed, non-standard.
Re:San Francisco’s Seismic Gamble by ggcdn on Tuesday April 17, 2018 @05:50PM (#16862626)
They don't base isolate tall buildings, they isolate short ones. The whole point of base isolation is period elongation. In a tall building, you're already flexible, and your column loads are tremendous. It makes no sense.
Re:San Francisco’s Seismic Gamble by malnourish on Tuesday April 17, 2018 @10:21AM (#16858533)
Would you be able to provide an explanation of what a dynamic element in the foundation is, for example?
Re:San Francisco’s Seismic Gamble by CGamesPlay on Tuesday April 17, 2018 @10:59AM (#16858920)
In mechanical fields, dynamic means "moving". The weight literally moves, so it's dynamic. Another YouTube video that explains it a bit better: https://www.youtube.com/watch?v=f1U4SAgy60c
Re:San Francisco’s Seismic Gamble by toufka on Tuesday April 17, 2018 @10:26AM (#16858596)
See how a dampened dynamic build vs a regular dynamic build react to movement (and you can imagine the static build): https://youtube.com/watch?v=xp2pGxFzrzI
Re:San Francisco’s Seismic Gamble by JshWright on Tuesday April 17, 2018 @10:51AM (#16858848)
>Apologies for the complaint, but could someone please let me know why I'm being downvoted for this question?

It's likely because you're implying "dynamic" is a "buzzword" in a discussion about structural engineering and seismic movements (which is, by definition, a dynamic system).

Re:San Francisco’s Seismic Gamble by malnourish on Tuesday April 17, 2018 @11:02AM (#16858951)
But I'm not, I was saying that due to my background, I can't help but think dynamic is a buzzword. Therefor I was asking someone who was clearly knowledgeable on the subject to set me straight.
Re:San Francisco’s Seismic Gamble by always_good on Tuesday April 17, 2018 @11:13AM (#16859061)
The "why"s (your prejudices) are irrelevant.

Also I don't really think there's a background you can have where you don't understand, or cannot lookup, the difference between dynamic and static if you really cared to understand. Seems more like self-important rhetoric than anything.

Re:San Francisco’s Seismic Gamble by JshWright on Tuesday April 17, 2018 @11:05AM (#16858971)
I don't think linking it to a buzzword adds anything to the conversation. The question didn't need a justification.
Re:San Francisco’s Seismic Gamble by malnourish on Tuesday April 17, 2018 @11:11AM (#16859038)
All right. I've removed it. Such is life
Re:San Francisco’s Seismic Gamble by drharby on Tuesday April 17, 2018 @10:46AM (#16858792)
What is your background?