News for hackers. Stuff that matters.
Re:Some chip makers have hidden latency and jitter issues fr... by rasz on Monday November 27, 2017 @02:33AM (#15785511)
They dont, This TLDR is wrong.

Puma 5 shipped with just enough resources for 8 downstream channels. Puma 6 has same resources, but 16 downstream channels. Bottleneck is in hardware accelerating packet decoding/assembly, queue/buffer is too shallow and more packets in flight result in stalls. You can disable this hardware block and magically modem stops being susceptible to DOS, but max throughput goes down to ~60Mbit (opposed to theoretical ~800Mbit with ~2Mbit DOS potential)

There are people with Puma 6 with ISP using only 6 downstream channels and their modems work just great. 8 is barely acceptable (even puma 5 has problems on the test and can be DOSed by ~10Mbit), 16 is just plan broken.

Re:Some chip makers have hidden latency and jitter issues fr... by nalllar on Monday November 27, 2017 @07:34AM (#15786820)
DOCSIS "modems" are layer 3 devices as well actually.

The DOCSIS standard requires filtering by IP address and port [1] built in to the modem, instead of at the CMTS. This is back-asswards, as a hacked modem can ignore the filtering, but it's part of the spec.

There are multiple sources of jitter in the puma 6/5: more channels = more jitter, more flows = more jitter/complete failure at ~2000 separate active flows in a 1 second period.

[1]: http://www.cable-europe.eu/wp-content/uploads/bsk-pdf-manage... - Annex F Protocol Filtering (Normative)