News for hackers. Stuff that matters.
Re:Introducing Atom-IDE by aesthetics1 on Tuesday September 12, 2017 @02:50PM (#15230363)
This seems aimed squarely at VSCode. VSCode does a lot of this now out of the box (or with a few extensions). I think Atom is really just trying to keep up. I personally do not believe they have the horsepower to compete with Microsoft here though. VSCode is a phenomenal product.
Re:Introducing Atom-IDE by Longhanks on Tuesday September 12, 2017 @02:53PM (#15230414)
Most importantly, VS Code does all this with a lot better performance and without Facebook.
Re:Introducing Atom-IDE by Pigo on Tuesday September 12, 2017 @04:09PM (#15231896)
I fought for Atom for a long time. But after browsing a node_modules folder in Code, I realized how much I'd just accepted poor performance. It also worked as good on my Linux devices as my work pc.
Re:Introducing Atom-IDE by whipoodle on Tuesday September 12, 2017 @06:29PM (#15233533)
My impressions were the same. Unfortunately VS Code caused some data loss on the first day I tried it, so I chose to keep using Sublime, but it seems really good overall.
Re:Introducing Atom-IDE by nerdponx on Tuesday September 12, 2017 @07:27PM (#15233984)
data loss

Care to elaborate? Might be good to help others avoid the same problem.

Re:Introducing Atom-IDE by whipoodle on Tuesday September 12, 2017 @09:11PM (#15234647)
Basically, it closed a buffer because the backing file disappeared when I checked out a different branch. So I guess the lesson is use your file system to retain data and never your editor, which sounds obvious and you could certainly argue the loss was my fault. But I do that all the time with Sublime and never had this problem once. In fact I could quit Sublime altogether and the data would still be there when Sublime reopened.

Basically, I can see how the choice they made is a reasonable one, but my stance is a buffer should never close until I say so. If the backing file disappears, the last contents of the buffer should stay in there until I close it.

I bet a lot of people will never get bit by this, but it's nasty enough that I think they should reconsider this decision. But for me it doesn't matter, I don't want to lose work because I trusted my editor to hold on to something and it didn't, so I'll likely never use it again.

Re:Introducing Atom-IDE by betenoire on Tuesday September 12, 2017 @09:43PM (#15234812)
I think every editor can probably configured to do this. I've set up my VIM to do this specifically (auto reload the buffer when the file is modified). I don't think that one's on VSCode.
Re:Introducing Atom-IDE by _tulpa on Wednesday September 13, 2017 @12:19AM (#15235505)
They're not configured to do that by default, most of them ask prompt you if a file changes.

This one is on VSCode for having unsafe default behaviour which is also different to pretty much all the other editors.

Re:Introducing Atom-IDE by bpasero on Wednesday September 13, 2017 @03:05AM (#15236133)
VS Code will never close a buffer that has changes (e.g. is dirty). In this case, the buffer was closed because the editor was not dirty. You can change this by configuring "workbench.editor.closeOnFileDelete": false
Re:Introducing Atom-IDE by nerdponx on Wednesday September 13, 2017 @04:09PM (#15242114)
Having that default to "true" is really silly. VSCode is OSS right? That seems like a mulligan pull request to me. I can't imagine anyone is relying on the default behavior as-is.
Re:Introducing Atom-IDE by krisdol on Tuesday September 12, 2017 @05:38PM (#15233071)
> and without Facebook

And Atom does it without Microsoft.

Seriously though, what kind of comment is that? Facebook develops open source plugins for the atom ecosystem, and somehow that's supposed to be the most important criticism?

Re:Introducing Atom-IDE by thaiphanvevo on Tuesday September 12, 2017 @06:04PM (#15233317)
Facebook set a precedent in their open source licensing rules where users of their libraries aren't allowed to sue them for patent infringement.
Re:Introducing Atom-IDE by thewhitetulip on Tuesday September 12, 2017 @11:26PM (#15235276)
Why would the users of their libraries sue Facebook for patent infringement? I don't get it.
Re:Introducing Atom-IDE by adamhepner on Wednesday September 13, 2017 @03:27AM (#15236226)
If I recall the argument against Facebook here, the point is: let's assume that you found a company, file for a patent and implement it using some open source tools/libraries, also backed by Facebook. Now somewhere down the line FB decides that your product is really great and they can make something similar work for their platform, so they pour resources into developing their version of your solution. You are pissed, and take them to court - but you yourself are now in breach of licence, so before you can take them to court, you need to invest (possibly a lot of) time and resources to move away from those libraries - and in the meantime their competetive product with their whole financial baking is probably giving your little one a pounding which you may not survive.

If you hadn't had used any FB libraries in the first place and Facebook decided to copy your product, you would at least have a chance to make your case in court in a timely manner.

But I'm also from Europe and may not understand all the intricacies of US justice system, so feel free to correct me if I'm wrong.

Re:Introducing Atom-IDE by thewhitetulip on Wednesday September 13, 2017 @07:08AM (#15237147)
Wow. If I understand this correctly, if I use their modules then I can't ever sue the company? :O
Re:Introducing Atom-IDE by qarioz on Wednesday September 13, 2017 @10:28PM (#15244584)
That's why some people cannot use React.
Re:Introducing Atom-IDE by johannes1234321 on Wednesday September 13, 2017 @04:18AM (#15236446)
It might not be the same person using their libraries, might be a different business unit or a company acquiring the other or whatever. Also if I can't sue Facebook this in turns means I grant FB rights to all my parents (not legally but practically) (Note: IANAL and am just responding to the comment knowing to little about FB's preciseice licensing)
Re:Introducing Atom-IDE by bitmapbrother on Tuesday September 12, 2017 @06:33PM (#15233580)
And this is somehow worse than a company that has extorted money from and threatened companies for using Linux?
Re:Introducing Atom-IDE by pritambaral on Tuesday September 12, 2017 @03:26PM (#15231067)
> and without Facebook

Does Atom have any kind of Facebook integration?

Re:Introducing Atom-IDE by shados on Tuesday September 12, 2017 @03:36PM (#15231269)
They're referring to how a lot of these plugins are features extracted from Nuclide and/or open sourced by Facebook.
Re:Introducing Atom-IDE by vorpalhex on Tuesday September 12, 2017 @03:06PM (#15230669)
I've always chosen Atom over VSCode because I don't want these features. Autocomplete even on really expensive IDEs runs way to slow, clever auto formatting and it's ilk tend to not work well for me at all, and I dislike the overbearing project management features in most IDEs.

I want a text editor that vaguely understands code with some simple file browsing and plug and play extensions. Atom trying to become VSCode isn't beneficial here at all.

Re:Introducing Atom-IDE by mrnaught on Tuesday September 12, 2017 @03:43PM (#15231427)
> Autocomplete even on really expensive IDEs runs way to slow..

Not true for jetbrains ones. Autocomplete speed is One of the reasons for me to go for their toolbox subscription

Re:Introducing Atom-IDE by vorpalhex on Tuesday September 12, 2017 @03:49PM (#15231568)
Even with a fully unlocked enterprise license on it, autocomplete was lagging far behind me on a high end macbook pro. Maybe I just type too fast or the libraries I use are poorly laid out, but it was not working.
Re:Introducing Atom-IDE by romanovcode on Wednesday September 13, 2017 @05:59AM (#15236867)
Java.
Re:Introducing Atom-IDE by krisdol on Tuesday September 12, 2017 @05:40PM (#15233094)
I recently fired up WebStorm and found typing to be slower than atom for most files. I wouldn't open a large file in atom, sure, but it's been getting better in that regard and generally most of my code files are < 400 lines anyway.
Re:Introducing Atom-IDE by damieng on Tuesday September 12, 2017 @04:44PM (#15232431)
And thanks to the way the extension system works in Atom you can keep your editor that way. These packages are entirely optional.

The only changes made to Atom at all to facilitate this were better built-in watching of files in Atom (benefits all packages and should improve things like the tree view when it switches over) and an async shutdown mechanism for packages.

Re:Introducing Atom-IDE by komali2 on Tuesday September 12, 2017 @03:27PM (#15231089)
>I want a text editor that vaguely understands code with some simple file browsing and plug and play extensions

This is my config of vscode. I disabled all autocomplete because it seemed shitty and non-functional to me (for example, I'm in an HTML file and type "<d," I see now "dialog," followed by "div." Figuring out how many times I need to press "tab" is a lot worse UX for me than just typing "<div>" every time). With all that autocomplete, pop-up dropdown menu BS disabled, it's nice and smooth.

Re:Introducing Atom-IDE by MadcapJake on Wednesday September 13, 2017 @09:32AM (#15238038)
They're just new packages (ide-*) that you can install. AFAICT nothing is included in Atom core.
Re:Introducing Atom-IDE by eggpy on Tuesday September 12, 2017 @04:19PM (#15232062)
Sublime Text?
Re:Introducing Atom-IDE by vorpalhex on Wednesday September 13, 2017 @11:22AM (#15239104)
Not as of 3.0 though I did enjoy 2.x quite a bit.