News for hackers. Stuff that matters.
Re:TunnelBear Publishes Security Audit by bg0 on Wednesday August 16, 2017 @01:42PM (#15029484)
Are there any nice free VPN Clients out there? I haven't been very lucky in finding any in the OS X realm
Re:TunnelBear Publishes Security Audit by fancy_pantser on Wednesday August 16, 2017 @02:00PM (#15029625)
You can use the MacOS Network settings to connect to most types of VPN (hit "+" and fill in the forms to add a new connection). For free, open-source clients, Tunnelblick is very common.
Re:TunnelBear Publishes Security Audit by xorbyte on Wednesday August 16, 2017 @03:05PM (#15030197)
macOS and iOS don't support OpenVPN with the built-in client. You can use strongSwan-based VPNs (e.g., as would be deployed through Algo) or Cisco, but for OpenVPN you'll need a custom client which, unfortunately, very likely brings along its own .kext.
Re:TunnelBear Publishes Security Audit by X-Istence on Wednesday August 16, 2017 @04:52PM (#15031282)
TunnelBlick comes with a tun/tap kext that is signed. This is not required on systems where Apple already has tun/tap support compiled in (not sure when that started, but it's been a long time)

From the known issues page:

"If you are running on OS X 10.6.8 or higher and using OpenVPN 2.3.4 or higher and using a TUN device, the default Tunnelblick setting to "Load Tun Automatically" (on the "Advanced" settings window) will avoid this problem by not loading the tun kext — OS X's built-in "utun" device will be used instead of a "tun" device."

Re:TunnelBear Publishes Security Audit by CountSessine on Wednesday August 16, 2017 @04:07PM (#15030851)
Is a .kext actually required for a vpn client? My understanding is that TunnelBlick just creates a tun network in user-space. Why would it need to be in the kernel?
Re:TunnelBear Publishes Security Audit by atlgeek007 on Wednesday August 16, 2017 @01:58PM (#15029617)
Tunnelblick is the best option I've found for OpenVPN.

If you're using IPSec then there's a client built into the OS.

Re:TunnelBear Publishes Security Audit by Nullabillity on Wednesday August 16, 2017 @02:50PM (#15030077)
NetworkManager is pretty much the default GUI for most distros and DEs, and has built-in support for OpenVPN, PPTP, L2TP, IPsec, SSH, etc... And it also integrates well with the Wifi setup, so you can easily set it up to automatically connect to the VPN when you connect to certain networks.
Re:TunnelBear Publishes Security Audit by joombaga on Wednesday August 16, 2017 @06:06PM (#15031778)
Works great with Cisco Anyconnect too. My setup even automatically pulled an RSA token from my stoken config.
Re:TunnelBear Publishes Security Audit by oneweekwonder on Thursday August 17, 2017 @01:03AM (#15033939)
After macOS deprecated pptp I stumbled upon the flow vpn client[0]. Replace the hostname, enter your credentials and it just works!

[0]: https://www.flowvpn.com/download-mac/

Re:TunnelBear Publishes Security Audit by seaghost on Thursday August 17, 2017 @01:09AM (#15033954)
Re:TunnelBear Publishes Security Audit by codefined on Wednesday August 16, 2017 @01:52PM (#15029564)
OpenVPN is free and I use it pretty often. Supports both CLI & GUI. Would highly recommend it as an excellent client.
Re:TunnelBear Publishes Security Audit by gluczywo on Wednesday August 16, 2017 @02:22PM (#15029858)
Fruho is a decent VPN GUI on Linux
Re:TunnelBear Publishes Security Audit by pnutjam on Wednesday August 16, 2017 @03:37PM (#15030504)
But the console is so easy to use; openvpn vpn_config.ovf

There your done...

Re:TunnelBear Publishes Security Audit by kfriede on Wednesday August 16, 2017 @02:16PM (#15029803)
I was hesitant to buy Viscosity, but it has been well worth the money.
Re:TunnelBear Publishes Security Audit by post_break on Wednesday August 16, 2017 @03:17PM (#15030306)
Secure Pipes.