News for hackers. Stuff that matters.
Re:When TV Logos Were Physical Objects by jameshart on Monday May 22, 2017 @08:07PM (#14397834)
Article seems to be under the mistaken impression that these tv idents were built, put in front of a camera and recorded and then the recordings broadcast - possibly after even applying postproduction effects. Actually they were generally broadcast live by pointing a camera at them. This is one of those artifacts of digital era thinking which misunderstands the nature of analog era technology.

These idents needed to be able to be shown on demand, in the event of a breakdown in some other piece of equipment. They needed to be able to run for arbitrarily long periods of time. They needed to be shown many times per day during regular programming. And you couldn't just connect up a computer and stream mpeg video - you would need some sort of a device that could generate the TV picture.

TV was recorded on video tape and video tape wouldn't work for this application - it would need to be rewound every time you stopped showing it; it would wear out with continual use; it would have a fixed maximum duration.

Having a camera standing by pointing at the appropriate device, on the other hand, was relatively easy.

Most tv stations just pointed a camera at a piece of card. The BBC obviously had to go one better and use a crazy globe and mirror setup.

Re:When TV Logos Were Physical Objects by galago on Monday May 22, 2017 @08:50PM (#14398003)
You're right about things getting forgotten. Two of the setups you're referring to in the pre-tape era were the film chain for playback and the kinescope for recording. These things were finicky and required extra personnel, whereas pointing one of the cameras at a physical logo was much easier. Its why much of early television, especially local programming was not saved.

https://en.wikipedia.org/wiki/Film_chain

https://en.wikipedia.org/wiki/Kinescope

This is a kinescope of Playhouse 90s production of Requiem for a Heavyweight which was performed live on TV like a play. Its amazing to think they changed sets and costumes during commercials.

https://www.youtube.com/watch?v=9B0h2Anklbo

Re:When TV Logos Were Physical Objects by Nition on Monday May 22, 2017 @09:52PM (#14398254)
This is contradicted directly in the article re the BBC logo. It says the globe and mirror setup was rotoscoped/traced over to create the final cartoon look that was broadcast. Or is the article wrong?

Edit: The article is wrong! The colour was added to the camera's output live!

Re:When TV Logos Were Physical Objects by Zikes on Monday May 22, 2017 @09:58PM (#14398268)
There's an update at the bottom of the article for this:

> UPDATE: It turns out the BBC Globe ident wasn’t rotoscoped or animated, instead it was recorded live using the Noddy camera system and the color was created by adjusting the contrast. Thanks, Gene!

Re:When TV Logos Were Physical Objects by Nition on Monday May 22, 2017 @10:00PM (#14398279)
That's good. Although that's a bit wrong. You can't take a monochrome image and add colour just by adjusting the contrast. I'm also not sure you can say it was "recorded" at all if it was broadcast directly, but that's a language question.
Re:When TV Logos Were Physical Objects by jdboyd on Monday May 22, 2017 @10:19PM (#14398365)
I believe the contrast adjustment was likely to get rid of any unwanted shades of grey before colouring the two extremes.
Re:When TV Logos Were Physical Objects by jameshart on Monday May 22, 2017 @10:36PM (#14398422)
I suspect 'coloring the two extremes' involves something more like 'wiring the luminance signal up to the chroma'. Again, try not to think digital. This isn't photoshop, this is signal processing.
Re:When TV Logos Were Physical Objects by tomc1985 on Tuesday May 23, 2017 @12:18AM (#14398766)
Or it could be a filter over the camera lens.
Re:When TV Logos Were Physical Objects by Jaruzel on Tuesday May 23, 2017 @01:48AM (#14399074)
Once you have a mostly Black, and White (with no greys) image - it's relatively simple via basic electronics to colour replace those with alternate colours - much like the old analogue chromakey 'blue-screen' techniques.
Re:When TV Logos Were Physical Objects by Theodores on Tuesday May 23, 2017 @12:10AM (#14398745)
In the UK the Anglia TV 'knight' is remembered by old-timers:

https://www.youtube.com/watch?v=73CnqdPanio

> The Anglia Knight is over 100 years old and was commissioned originally by the King of the Netherlands.

> The king was a patron of a society called The Falcon Club, which met once a year to compete in horse races, falconry and other sports.

> In 1850, the King felt so confident that he would win the contest that he commissioned a trophy from a London firm of silversmiths. The trophy was modelled on the statue of Richard Coeur de Lion, which stands outside the House of Parliament, but it was made to represent the Black Prince.

> However, to the King's dismay it was won by an Englishman and brought back to Britain where it remained in the possession of the victor's family until 1959 the year Anglia first went on the air.

> A famous firm of Bond Street jewellers and goldsmiths (Aspreys) was commissioned to make certain modifications including the pennant on the lance and the magnificent trophy became the famous symbol of Anglia Television.

> The Anglia Knight is made of sterling silver and weighs over 700 ounces. The detailed work was hand-chased by a superb craftsman.

> The music that is heard when the knight is on air is part of Handel's Water Music, specially arranged for Anglia Television by Sir Malcolm Sargent.

> Thanks to Steve Hearn and Adrian Ruck

More background:

http://www.closinglogos.com/page/Anglia+Television

Here is the 1959 original:

https://www.youtube.com/watch?v=eFiC0RxKeH8

So was that on tape or live recorded? If so, how did the cut the camera shots? All possible live but is it?

Re:When TV Logos Were Physical Objects by Stoo on Tuesday May 23, 2017 @06:36AM (#14400181)
I remember the Anglia TV knight! I didn't realise it had such a fascinating story behind it.
Re:When TV Logos Were Physical Objects by slededit on Tuesday May 23, 2017 @03:30AM (#14399503)
A monoscope tube was also sometimes used for this purpose. But they had to be custom made for a specific image. It was also only good for Black and White.

https://en.wikipedia.org/wiki/Monoscope

Re:When TV Logos Were Physical Objects by tdeck on Tuesday May 23, 2017 @02:21AM (#14399201)
Perhaps the earliest example of this was Felix the Cat, used by early mechanical television stations in the late 1920s to claim their part of the broadcast band [1]. They placed a wooden model of Felix on a turntable, trained a 120 line "flying spot" camera on it, and left it on. I read a contemporary account of watching an early televised prize fight which mentioned this as well, but I can't for the life of me find it anymore.

[1]: http://framemaster.tripod.com/Electronictv.html

Re:When TV Logos Were Physical Objects by kbutler on Monday May 22, 2017 @08:46PM (#14397985)
Do you have a citation for that? Looping films have been around for a long time.

Yes, physical films may wear out, but it seems like it would be easier to produce and distribute copies than to produce physical devices in many places.

Re:When TV Logos Were Physical Objects by eddieroger on Monday May 22, 2017 @09:20PM (#14398129)
You do realize that recording video content was inherently created /after/ the ability to transmit it in the first place, so even if looping has been around for a long time, the ability to transmit video has been around longer. And, as the other reference mentioned, much longer. The point of these systems was to be an alternate to a failure, so it failing wouldn't be acceptable - and rewinding or even replacing with a second tape would be a failure of a system that has to constantly present an image to the viewer.
Re:When TV Logos Were Physical Objects by unclenoriega on Monday May 22, 2017 @10:29PM (#14398398)
I'm sure you're correct, but be warned that starting a response with 'you do realize' is likely to make you sound like an asshole[0]

0. http://www.urbandictionary.com/define.php?term=you+do+realiz....

Re:When TV Logos Were Physical Objects by eddieroger on Monday May 22, 2017 @10:54PM (#14398475)
If your citation is Urban Dictionary, I think I'll take the risk. I could have been more tactful, sure, but so could have the post I replied to.
Re:When TV Logos Were Physical Objects by PhasmaFelis on Tuesday May 23, 2017 @01:41AM (#14399046)
No, he's right. "You do realize" always makes you sound like a jerk. You know very well that the person doesn't realize whatever it is, and you're rubbing their nose in it. If you intend to sound like a jerk, it's a fine go-to, but if not it should be avoided.
Re:When TV Logos Were Physical Objects by kbutler on Tuesday May 23, 2017 @12:26AM (#14398796)
I know of the zoopraxiscope, which displayed a looping motion picture in 1879.

https://en.m.wikipedia.org/wiki/Zoopraxiscope

That predates any video transmission I'm aware of by a significant margin.

Looks like the preferred technology for station logos and test patterns since the 50s was the monoscope, a specialized device to generate a single image. The Indian Head logo, used in the 1970s, was one example.

https://en.m.wikipedia.org/wiki/Monoscope

Victim of nerd-sniping - some early TV camera/broadcast systems in the 1930s, especially in Europe, first recorded to film, which was then immediately scanned for broadcast. This could be used outdoors where there was not enough light for the TV scanning directly. "Intermediate film systems" http://en.m.wikipedia.org/wiki/Intermediate_film_system

Anyway, broadcasting from previously recorded film or other images has been around since the beginnings of TV broadcasts, even though recording the transmitted signal took until the 1940s (kinescopes - a film camera recording a TV screen).

Re:When TV Logos Were Physical Objects by jameshart on Monday May 22, 2017 @08:56PM (#14398030)