News for hackers. Stuff that matters.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by systems on Friday April 28, 2017 @11:34AM (#14220244)
why aren't teeth implants and crowns getting cheaper because of 3D Printers

crowns and teeth implants should be a lot easier than other organs or bones

Re:Getting Closer to Mass Production of Bones, Organs, and I... by yourapostasy on Friday April 28, 2017 @12:11PM (#14220613)
I spoke about this with my dentist, and according to him the research and money is going to ever-greater precision and bio-compatibility. Scanning and imaging the tooth to replace is still part-art and not fully-automated yet. The scanning processes out on the market has not perfected discriminating the tooth from the surrounding tissue, so there is some manual work the dentist performs to shape the replica; there are weird artifacts here and there they shave away and/or re-shape. Bio-compatibility sounds like it is is very close: the latest materials outlast human lifespans, and is tougher than enamel, with very small populations that adversely react to the materials.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by dbcurtis on Friday April 28, 2017 @12:37PM (#14220869)
The part-art comment is certainly true. I have a 3D milled ceramic crown that was done years ago during the early days of the technology. It is absolutely great in every way, and has been since day 1. My wife went to the same dentist a few months later, another 3D milled ceramic crown. Same guy, same machine. The crown had an awful fit, was never right, and she had it replaced with a different technology within 6 months. Getting to three-9's reliability is hard for all of us.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by killjoywashere on Friday April 28, 2017 @03:43PM (#14222453)
Gold amalgams outlasted the human lifespan too. As usual, the problem is the interface: eventually, a bacterium will slip its way in between, ferment some lactose, and drop the pH, eventually dissolving away enough of the native enamel for a friend to join, and away the positive feedback loop goes.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by komali2 on Friday April 28, 2017 @12:26PM (#14220766)
Heh, Outlast humans lifetimes for now.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by maxerickson on Friday April 28, 2017 @11:36AM (#14220262)
Because a 3d printer isn't going to be vastly better than a milling machine.

https://www.usatoday.com/story/news/nation/2014/04/06/dentis...

(especially for such a small amount of material, material with a lot of requirements, bio-compatibility, durability, etc)

Re:Getting Closer to Mass Production of Bones, Organs, and I... by sjg007 on Friday April 28, 2017 @12:04PM (#14220531)
Not much competition I would imagine as well as "installation" costs
Re:Getting Closer to Mass Production of Bones, Organs, and I... by ptero on Friday April 28, 2017 @03:17PM (#14222248)
Cost of an implant, at least in the US, is a small part of the total procedure cost (dentist's fees, malpractice insurance, etc.). Total implant price tag (shared between patient and his insurance), might be $5k for a single tooth.

This is prohibitive for many people. I wonder if advances in robotics can be coupled with lower implant costs to provide a significantly lower cost alternative. Robotics can help lower dentist fees (lower skill level) and also limit or eliminate malpractice risks by limiting human's role.

Not everyone would want the robot-driven implant from just out of dental school nurse, but I think it can be a decent option for many patients.

Re:Getting Closer to Mass Production of Bones, Organs, and I... by nsxwolf on Friday April 28, 2017 @01:11PM (#14221184)
According to my dentist, implants are getting cheaper or are about to get cheaper, because several important patents have expired and dentists are training to do in-office implants with generic screws.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by ShannonAlther on Friday April 28, 2017 @11:47AM (#14220383)
In addition to maxerickson's point, a lot of the bill goes into paying the dental professionals who do the implanting. It's a (minor) surgical procedure.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by chiph on Friday April 28, 2017 @12:03PM (#14220516)
My dentist has a jar in his waiting room full of the stems left over from all the crowns he's placed (he uses the CEREC system). No idea why he thinks people would be interested in seeing them while they wait, but I observe that each one represents about $1800 in billing revenue. And there's hundreds of them in there.

The material is interesting - it starts off as a lavender color, but after curing in the oven you get a shade which is a close match to your natural tooth color (they have charts/samples to pick a match before the milling is done).

https://en.wikipedia.org/wiki/CEREC

Re:Getting Closer to Mass Production of Bones, Organs, and I... by kwhitefoot on Friday April 28, 2017 @12:39PM (#14220894)
> each one represents about $1800 in billing revenue.

Do you mean that it costs a patient USD1800 to get a crown?

I have two crowns both made and installed at the same dental practice in Drammen, Norway, using, I think, the CEREC system. At one time he had a screen mounted above the couch so that you could see it being shaped while you waited.

Including the initial consultation, the crown itself, and the fitting I paid about NOK5000 each. That's about USD580 at today's exchange rate, about USD750 at the rate that was in force when I had them done.

Re:Getting Closer to Mass Production of Bones, Organs, and I... by chiph on Friday April 28, 2017 @02:49PM (#14222020)
> Do you mean that it costs a patient USD1800 to get a crown?

That's what he charges and gets paid. Of that, the insurance company will pay around half, with the patient paying the rest.

Compared to medical billing in the US, it's a miracle of clarity. I suspect because people are more willing to change dentists, and even with a sore tooth, they're willing to pick someone who is better/cheaper. So there's some price pressure by the customer.

Re:Getting Closer to Mass Production of Bones, Organs, and I... by dsp1234 on Friday April 28, 2017 @02:02PM (#14221648)
It's important to note that in the US (not sure about Norway), the revenue from a procedure, and the out of pocket cost that a person pays is not the same due to insurance. A procedure could cost a very small amount out of pocket, but still provide significant revenue to a doctor if is insurance is paying for a large portion of the procedure.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by systems on Friday April 28, 2017 @02:39PM (#14221936)
i guess the 1800 per crown also include the root canal treatment

i think it is usually around 600-800 USD for the root canal treatment and around 1000 for the crown

Re:Getting Closer to Mass Production of Bones, Organs, and I... by kwhitefoot on Friday April 28, 2017 @03:45PM (#14222471)
Ah, perhaps we are talking about different things here. My crowns are just that, quite a lot of the original tooth is still there.

But it still seems to me that you are being seriously ripped off in the US.

Re:Getting Closer to Mass Production of Bones, Organs, and I... by maxerickson on Friday April 28, 2017 @04:28PM (#14222793)
What's a crown worth though?

Dentists have been successful in limiting the number of dentists, so decent ones can charge good money.

The terrifying thing is that they tend to do a lot more out of pocket business than doctors/hospitals and so the prices for dental care are generally lower than the prices for similar healthcare (they often do first appointment x-rays for free, or for cheap; hospitals will charge $200+ just for something that needs 2 or 3 x-rays).

Re:Getting Closer to Mass Production of Bones, Organs, and I... by scythe on Friday April 28, 2017 @05:55PM (#14223424)
A 3D Printer cannot print a material which will crumble, melt or break during the printing process. This excludes a lot of materials due to the pressure/temperature required in order to achieve cohesion. Natural teeth are made of a nanostructured material (dense hydroxyapatite nanorods in a less dense hydroxyapatite matrix) which is the sort of thing that cannot be 3D-printed.
Re:Getting Closer to Mass Production of Bones, Organs, and I... by bluedino on Saturday April 29, 2017 @10:45AM (#14226797)
Some dentists have an in house cnc/cmm type machine and make your crowns on-site (takes two weeks but are better quality). Mine still sends them out, costs me about $400 out of pocket, insurance covers the other 50%.