Re:Fusion reactors: Not what they’re cracked up to be
by FiatLuxDave on Wednesday April 26, 2017 @11:41AM
(#14203941)
This is true. Back at Fiat Lux when we designed our D-D reactor, we intended it to sit inside a pool of water and borax. Since we didn't need to regenerate tritium, just absorbing the neutrons with boron was the cheapest solution. As far as I know, Borax is the cheapest effective neutron shielding known. We would have liked to have built our vacuum chamber out of purely Al (since Al-28 has a two-minute half-life), but we went with steel for cost reasons.
Unfortunately, we never made enough neutrons to activate anything worthwhile. Nevertheless, it is certainly possible to work around neutrons through design decisions.
Re:Fusion reactors: Not what they’re cracked up to be
by erikgrinaker on Wednesday April 26, 2017 @11:42AM
(#14203959)
Sure, activation in itself isn't necessarily a big problem, but I believe that embrittlement of the blanket and other plasma-facing surfaces due to the high neutron fluxes is one of the major engineering challenges for ITER and similar tokamak designs.
Some fission isotopes are really icky to deal with, as everyone has heard...
On the other hand if you don't like dealing with cobalt-60 waste at your fusion plant, simply stop using cobalt alloys in your reactor vessel.
It turns out to be "not that big of a deal" to design a fusion plant where neutron activation isn't important. The quotes are because nothing is easy in fusion but as a problem its pretty low on the list.