News for hackers. Stuff that matters.
Re:Breaks Observed in Rover Wheel Treads by redcalx on Wednesday March 22, 2017 @08:47AM (#13930427)
I assume they're titanium. I wonder though if they use titanium crystals as per jet engine turbine blades?
Re:Breaks Observed in Rover Wheel Treads by mabbo on Wednesday March 22, 2017 @08:51AM (#13930453)
"A routine check of the aluminum wheels" - first sentence of the article.
Re:Breaks Observed in Rover Wheel Treads by averagewall on Wednesday March 22, 2017 @09:54AM (#13930866)
Titanium is heavier than Aluminium and only a little bit stiffer, so it's not necessarily a good choice for a weight-sensitive load bearing part even with unlimited budget.
Re:Breaks Observed in Rover Wheel Treads by redcalx on Wednesday March 22, 2017 @09:56AM (#13930889)
However, the pure/single crystalline form is potentially strong enough that it would be possible to use less material than for the non-crystalline form.
Re:Breaks Observed in Rover Wheel Treads by hbk1966 on Wednesday March 22, 2017 @11:12AM (#13931545)
The wheels are all ready only like .65 mm thick, how much thinner do you want them to be?
Re:Breaks Observed in Rover Wheel Treads by redcalx on Wednesday March 22, 2017 @04:50PM (#13934806)
If using mono-crystalline titanium can achieve the same hardness, strength, durability, etc. at less mass then why wouldn't you choose that option?
Re:Breaks Observed in Rover Wheel Treads by jcoffland on Wednesday March 22, 2017 @01:16PM (#13932785)
The tread is 0.65mm thick.
Re:Breaks Observed in Rover Wheel Treads by jordanb on Wednesday March 22, 2017 @08:50AM (#13930448)
Turbine blades are made from inconel. And all solid metal is crystalline.
Re:Breaks Observed in Rover Wheel Treads by andy_ppp on Wednesday March 22, 2017 @08:59AM (#13930511)
You can grow a turbine blade out of one crystal of titanium rather than many which improves the strength.

Here's an amazing video about other parts of the structure and construction of Rolls Royce titanium turbine blades. It's awesome.

I've no idea about inconel...

https://www.youtube.com/watch?v=aFRdp1Js9Kc

Re:Breaks Observed in Rover Wheel Treads by comicjk on Wednesday March 22, 2017 @09:34AM (#13930727)
You're mistaken about all solid metal being crystalline - look up amorphous metal. I've held a ribbon of it, it's quite impressive how it flexes. https://en.m.wikipedia.org/wiki/Amorphous_metal
Re:Breaks Observed in Rover Wheel Treads by the8472 on Wednesday March 22, 2017 @09:39AM (#13930763)
> And all solid metal is crystalline.

https://en.wikipedia.org/wiki/Amorphous_metal

Re:Breaks Observed in Rover Wheel Treads by redcalx on Wednesday March 22, 2017 @05:01PM (#13934911)
Re:Breaks Observed in Rover Wheel Treads by SEJeff on Wednesday March 22, 2017 @11:01AM (#13931462)
SpaceX "3D Prints" their merlin engine chambers from the same alloy, inconel.

http://www.spacex.com/news/2014/07/31/spacex-launches-3d-pri...

Re:Breaks Observed in Rover Wheel Treads by greglindahl on Wednesday March 22, 2017 @06:08PM (#13935457)
SpaceX's entire Super Draco rocket engine is 3d printed, too.
Re:Breaks Observed in Rover Wheel Treads by mtreis86 on Wednesday March 22, 2017 @08:56AM (#13930483)
Some axial turbines have ceramic blades
Re:Breaks Observed in Rover Wheel Treads by jamespetercook on Wednesday March 22, 2017 @08:49AM (#13930439)
The article states they're milled out of solid aluminum