As far as I can tell, the manual labor is roughly the same in both cases. Chinese mechanical movements are not assembled entirely by machines--in fact, in many cases the machining may be quite similar. (Many of the popular Seagull calibers are basically clones of ETA or Miyota designs, and I would guess use the same manufacturing process.)
The main price difference is (obviously) some combination of a) quality control and tolerances (do you ship a marginal unit or do you throw it out?), b) conditions from the factory (do you adjust the movement to n positions before shipping it, or just ship it?), and c) brand, as you note.
(a) and (b) have real economic costs. How much of a watch's cost comes down to those versus (c) is hard to say.
I have an unbranded Rolex "homage" from China with a Seagull clone of an ETA 2824. The case is a bit rough around the edges--quite noticeably if you look--and the timekeeping is (from the factory) about +6s/day. (I don't have a timegrapher, so I can't tell you the positional variation.)
So, definitely not a Rolex. But for about 3% the price I'm not complaining. ;)
Edit: To add to this point, I am reminded of the similarity between ETA's different grades of movements (which are sold at different price points depending on precision/adjustment/quality) and the practice of computer chip makers to do similar (i.e. to sell CPUs at a lower clockspeed if they don't pass QC at the higher speed).
This isn't exactly what ETA does; some of the grades use different material for the hairsprings. But Standard and Elabore are apparently the same material just adjusted to different tolerances, which sounds awfully similar.
I was highly tempted by the Seagull "1963", which is a replica of a model made for the Chinese air force in 1963 (powered by a Seagull ST19 movement, supposedly a clone of a Swiss Venus column-wheel chrono movement!).
But there are quite a number of other Seagull and similar around--some made for the Chinese domestic market, and a (seemingly increasing) number made for export inspired by various classic designs.
They aren't, after all, really that much better than regular cars in the first place. A simple $40,000 luxury model from BMW or Audi is quite comparable in terms of fit and finish. The types of leathers and woods will differ, but for the purposes of a daily driver, that would make no practical difference.
But because of that inferiority (and sensitivity to manufacture), the difference between poor and high quality mechanicals is much more readily observable by the owner than for a quartz. (If my watch gains or loses 30s/day--a reasonable performance for a Seiko 7s26--I will quickly notice, whereas if my quartz gains or loses one second, I may not.)
In the car case, the spectrum is basically continuous; in watches it's segmented in this very peculiar way.
Can you get a similar, and perhaps even better constructed (machines are, after all, more precise than humans) watch from China? Sure. Is it the same watch? No.
These watches are luxury items - a status symbol. They are the Rolls Royce of watches: built by hand, damned expensive, and worth every penny to those who buy them.
Of course, if you prefer the watch from China, then more power to you. I prefer my Dodge car over a Rolls Royce as well; I don't need or want a symbol, just a good car.